Full Product Manual

OM_GS_0218 www.sportsafieldsafes.com 12
13 ESL5 UL E-LOCK SECURITY CODE SETUP
IMPORTANT. It is necessary to re-program your gun safe with a new security
code you have personally selected to provide maximum household security.
A security code is a series of entries on the keypad. An “entry” is a single press of
one button/digit. You must use a 6-digit security code. Choose a security code
which is easy to use, but difficult to guess. A poor example for a secure code would
be 1-1-1-1-1-1 or 3-2-1-1-2-3.
ENSURE YOU DOOR IS OPEN
1. Locate and press the detent rod, positioned on the door frame near the hinges
2. With the detent rod pushed, extend the locking bolts by turning the handle
counter-clockwise
3. Press the [ C ] key and then the [ # ] key. The ESL5 E-Lock will produce a short
warbling tone (called the “good combo tone”) and the key pad lights strobe
with the tone.
4. Key in the last known 6-digit code. If this is the first time setting up your gun
safe enter the preset factory code [ 1 2 3 4 5 6 # ]. The [ C ] key can be used at
any time to clear an error in keying.
5. Next, enter your new 6-digit security code followed by the [ # ] key. The
warbling tone can be heard with valid entry.
6. Re-enter your new 6-digit security code followed by the [ # ] key to confirm.
The warbling tone can be heard confirming the new security code has been
successfully programmed.
7. If the code fails, you will hear four short beeps. The keypad returns to rest and
the process starts over. Repeat the steps above until successful.
IMPORTANT: DO NOT shut the safe door until you have confirmed you’re your
new security code has been entered correctly. Try your new security code at least
3 times to make sure the code has been saved, and you can lock and unlock the
door successfully.
NOTE. To wake up system, press the [ C ] key before entering any codes.