Full Product Manual

OM_GS_0218 www.sportsafieldsafes.com 11
NOTE: After you have entered the correct security code you have 5 seconds to
turn the handle and unlock the door before the locking mechanism is reactivated.
10 GENERAL E-LOCK QUIET MODE
1. To mute the E-Lock, enter code [ * 6 3 3 ]
2. To turn the sound back on, enter code [ * 6 6 ]
11 ESL5 UL E-LOCK BATTERY INSTALLATION
NOTE: The Sports Afield Maximum Security Series gun safes do not come with
override keys and must be opened using the E-Lock.
1. The ESL5 UL E-Lock on the Sports Afield Maximum Security Series safes require
a 9V alkaline battery.
2. The battery compartment is located under the keypad. To access, rotate the
keypad up to the left to release the E-lock from the locking ring.
3. Snap the 9V battery to the connector in the proper orientation.
4. Reinstall the keypad back onto the locking ring.
5. The E-Lock is ready to be programmed.
NOTE: This ESL5 UL E-Lock is equipped to alert you to a low battery by producing a
series of beeps (8 times). If you hear this, the battery needs replacing.
NOTE: The battery is to be inserted with the correct polarity. Exhausted batteries
must be removed from the product and discarded safely.
12 ESL5 UL E-LOCK OPENING INSTRUCTIONS
1. All Sports Afield Maximum Security Series gun safes come with a preset factory
code of [ 1 2 3 4 5 6 # ].
2. Press the [ C ] key followed by preset factory code [ 1 2 3 4 5 6 # ]. You will
hear a beep with each button push. If the code was successfully entered, you
will hear two beeps and the green light will illuminate.
3. To open the door, take a firm hold of the spindle hub, and rotate clockwise
4. Inside the safe, locate the spindle handles and thread into the respective holes
on the spindle hub.