SPORTS GO WALK Model no.: SGW01 smart footwear pedometer Footwear & Recreation Technology Research Institute Address: No.11, Gongyequ 8th Rd., Xitun Dist.
SPORTS GO WALK appreciates your purchase of SGW shoes, smart footwear pedometer, SPORTS GO WALK APP and related accessories. The smart footwear pedometer, SGW01, is embedded in the footwear and we need to advise you, however, of some legal limitations, restrictions, and warnings that apply to the use of our products. We sell SGW01 (smart footwear pedometer) to our cooperation partner, they install that in the footwear (left or right) when manufacturing. It is up to them to decide where and how to install.
FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.
Users Guide 1. Install the SPORTS GO WALK APP in the smartphone. (1) For iOS device, browse the SPORTS GO WALK APP in the App Store, (2) For Android device, browse the SPORTS GO WALK APP in the Google Play store, or scan the 2D bar code printed on the shoes box. Download the APP and install in the smartphone. 2. Connecting the shoes with the smartphone. (1) Launch the APP. Then shake the shoes to wake‐up the SGW01 inside. (2) Press “ ” to scan the shoes. Then press” ” to Choose the shoes to be connected.
3. Begin to use the smart pedometer If the shoes are successfully connected to the APP, the walking steps information in the shoes will be synchronized with the APP on the smartphone. Specification Operational frequency Power Supply RF technology Modulation Type Size 2402-2480 MHz CR23032 DC @3.0V BLE 5.2 GFSK Approx.