user manual

6300/6310 Treadmill Electronics Repair Manual – 6300 Introduction
Operating the 6300 Treadmill: Stop Functions
STOP/PAUSE Key
Pause function: Press the STOP/Pause key once. Display beeps once. Values such as calories
remain on display. SPEED/METS window flashes “0.0”. Press speed up to resume your workout.
Display beeps once. Values such as calories are retained.
Clear function: Hold the STOP/Pause key for three seconds. Display beeps once. All values clear.
Unit reverts to start up mode. “6300” scrolls across the lower windows.
EMERGENCY STOP Knob
Emergency Stop Function: Press the emergency stop knob. Display beeps once. Emergency
stop indicator lights. Lower window shows “----”.
Reset Function: Rotate the emergency stop knob clockwise. Display beeps once. Emergency
stop indicator extinguishes. Unit reverts to start up mode. “6300” scrolls across the lower windows.
Note: The emergency stop knob was eliminated Sept. 2004. To update an old unit, eliminating the
stop knob, you need two things: A jumper, which goes into the stop knob wire connector on the display,
and a plastic sticker, which covers the hole where the stop knob sat.
6300 INTRO.08