user manual

6300/6310 Treadmill Electronics Repair Manual – 6310 Introduction
6310 Treadmill Specifications at a Glance
Function Description
Operation Modes Manual; Programs: college track, climber’s trek, bay run, river run; Interval 1:1; Interval 1:2.
Programs originally had a set 30-minute length; Time settings were added Jan. 2004.
Heart Rate (HR) Function POLAR transmitter and heart touch rate (HTR)
Heart Rate Control (HRC) Heart rate target values: 65%; 72.5%; 80%
Display – Dot Matrix 30 x 16 dot
Display - Digital Windows
1.Distance / Incline (Board revised Feb. 2003 because incline stuck.)
2.Calories / HR
3.Time / Pace
4.Speed / Mets (Display became C-Safe compatible Dec. 2004)
Display - Keypad PET touch type, Sept. 2003
Emergency Stop Emergency stop knob on display (removed Sept. 2004); pause/stop key on keypad
Drive Board Revised June 2004 (new is V3.2) after motor brush change
Motor Speed 0.1-12.0 MPH (North America standard); 0.2-20.0 KPH (Europe)
Motor Highest Speed 2900 RPM
Motor Horse Power Originally 3.2 HP; revised to 4.0 Sept. 2003 with ribbed exterior
Motor Thermal Switch Turns on “Service” indicator if motor gets too hot (Sept. 2003)
Incline Range 0-15%
Incline VR Calibration 0% position = 1.20 VDC; measured on VR blue and green wires
Units: MPH/KPH Can be set by key sequence: See 6310 INTRO.08.
Power Requirements 120 VAC, 20 AMP dedicated (Europe: 220 VAC)
Frame Color: Originally gray, became silver Nov. 2004
6310 INTRO.01