user manual

6300/6310 Treadmill Electronics Repair Manual – 6310 Introduction
Operating the 6310 Treadmill: Stop Functions
STOP/PAUSE Key
Pause function: Press the STOP/Pause key once. Display beeps once. Workout memory values,
such as calorie expenditure, remain on display. SPEED indicator lights. SPEED/METS window
flashes “0.0”. Press speed up to resume your workout. Display beeps once. Workout memory,
including calorie expenditure, etc., is retained.
Clear function: Hold the STOP/Pause key for three seconds. Display beeps once. All values clear.
Unit reverts to start up mode. “SPORTSART” scrolls across the upper part of the main window.
“6310” appears in the lower part of the main window.
Emergency Stop Knob
Emergency Stop Function: Press the emergency stop knob. Display beeps once. All values clear.
All functions stop. “RESET EMERGENCY STOP BUTTON” scrolls across main window.
Reset Function: Rotate the emergency stop knob clockwise. Display beeps once. Unit reverts to
start up mode. “SPORTSART” scrolls across the upper part of the main window. “6310” appears
in the lower part of the main window.
Note: The emergency stop knob was eliminated Sept. 2004. To update an old unit, eliminating the
stop knob, you need two things: A jumper, which goes into the stop knob wire connector on the display,
and a plastic sticker, which covers the hole where the stop knob sat.
6310 INTRO.07