user manual

6300/6310 Treadmill Electronics Repair Manual – Motor
6300/6310 Inductor Test Configuration
6300/6310 Inductor Test Procedure
1. Disconnect the inductor wires from the drive board.
2. Put multimeter to the Ohm setting. Place one probe on each wire end.
3. Normal reading: 0.4 Ohm.
4. If there is no reading (OL), or a reading of 0 Ohm, or if the inductor makes a “wong” sound
as the user’s heel strikes the belt, replace the inductor.
MOTOR.07