user manual

6300/6310 Treadmill Electronics Repair Manual – Heart Rate
Heart Touch Rate (HTR) Operation
Display Board
HTR
心跳小板
3 PIN CABLE
PULSE
HTR
HANDLE BAR
HTR
HANDLE BAR
Order Part Operation
1
HTR
Handlebar
1.Place both hands on the HTR handlebars. The handlebars detect the user’s pulse.
2.The pulse signal travels across wires from the handlebars to the HTR board.
3.LED2 and LED4 on the HTR board light up when the user holds onto the
handlebars.
2
HTR Board 1.The HTR board receives, processes, and transmits pulse signals.
2.LED3 flashes each time an incoming pulse signal is received.
3.LED4 flashes each time an outgoing pulse signal is sent to the display board.
4.The HTR board sends its heart rate signal to the display board.
3
3-PIN Cable 1.The heart rate signal travels the 3-pin cable from the HTR board to the display
board.
4 Display
1. The display board CPU detects the digital heart rate signal and determines the
heart rate value.
2. The display PULSE window shows the heart rate value.
HR.01
HTR Board
HTR Handlebar
HTR Handlebar