user manual

6300/6310 Treadmill Electronics Repair Manual – Testing

EMI Filter Test (Continued)

Put the multimeter to the ohm setting. Place probes as shown below.

Test 3. Point A to Point E; Normal reading: No reaction (1 or OL).

Test Figure Test Point Normal Reading Test Item

Fig. 1 A-B 0.4 There should be continuity between A and

Fig. 2 C-D 0.4 There should be continuity between C and

Fig. 3 A-E 1 or OL (open) There should not be continuity between A

and E; Continuity here indicates a short.

FILTER.02