user manual

6300/6310 Treadmill Electronics Repair Manual – 6300 Introduction
6300 Treadmill Specifications at a Glance
Function Description
Operation Modes Originally had only manual mode and no exercise programs. Exercise programs added July
2003. Program time added Jan. 2004
Heart Rate (HR) Function POLAR transmitter and heart touch rate (HTR) readings
Heart Rate Control (HRC) Heart rate target values: 65%; 72.5%; 80%, Sept. 2003
Display – 7-Segment Digital
1.Distance / Incline (Board revised Feb. 2003 because incline stuck.)
2.Calories / HR
3.Time / Pace
4.Speed / Mets (Display became C-Safe compatible Dec. 2004)
Display - Keypad PET touch type, Sept. 2003
Emergency Stop Emergency stop knob on display (removed Sept. 2004); pause/stop key on keypad
Drive Board Revised June 2004 (new is V3.2) after motor brush change
Motor Speed 0.1-12.0 MPH (North America standard); 0.2-20.0 KPH (Europe)
Motor Highest Speed 2900 RPM
Motor Horse Power Originally 3.2 HP; revised to 4.0 Sept. 2003 with ribbed exterior
Motor Thermal Switch Turns on “Service” indicator if motor gets too hot, Sept. 2003
Incline Range 0-15%
Incline VR Calibration 0% position = 1.20 VDC; measured on VR blue and green wires
MPH in N. America
KPH in Europe
MPH determined by the IC chip. MPH =N. American standard; KPH=European standard.
Distance units cannot be changed by touching keys
Power Requirements 120 VAC, 20 AMP dedicated
Frame Incline support added Nov. 2003; Color: Originally gray, became silver Nov. 2004
6300 INTRO.01