Use and Care Manual

Page 6 of 15
OPERATING INSTRUCTIONS
1. Plug the unit into power source, and turn the switch “ON”;
2. Choose your bag size, with food or item inside, and place the
bag on top of the black rubber strip, but below the Air Portal.
Then close the cover (See Illustration Step 1);
3. Press the cover down firmly. Using two hands, press each side
until a click sound is heard.
4. Press the “Seal Only” button or “Vacuum Seal” and the red
LED will light ;
5. When the LED light disappears, the bag seal is done;
6. Press “release” buttons on either side.
7. Pull out the bag and it is ready.
Note:
Seal Only option will seal the bag.
Vacuum Seal option will remove air from the bag and
Seal the bag.