Replacement Part List

ManualsBrandsSportsman ManualsMiscellaneous PartsEarth Series 32.7cc Gas Powered T-Post Driver

GPDR

2-CYCLE GASOLINE POWERED PILE DRIVER

ASSEMBLY & OPERATING INSTRUCTIONS

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS

PRODUCT.

This!manual!provides!important!information!on!proper!operation!&!maintenance.!Every!effort!!

has!been!made!to!ensure!the!accuracy!of!this!manual.!These!instructions!are!not!meant!to!cover!

every!possible!condition!and!situation!that!may!occur.!!"#$"%"$&"#'("#$)*('#'+#,(-.*"#'()%#

/$+01,'#-'#-.2#')3"#4)'(+1'#/$)+$#.+'),"5#!

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR

UNSAFE, DO NOT OPERATE THIS PRODUCT!

HAVE QUESTIONS OR PROBLEMS? DO NOT RETURN THIS PRODUCT TO

THE RETAILER - CONTACT CUSTOMER SERVICE.

If!you!ex p er ie n ce !a !p ro b le m!or!ne ed !p a rt s!f o r!th is !p ro duct,!visit!our!we b s ite !

http://www.buffalotools.com!!or!call!our!customer!help!line!at!67888798:7;<86,!Mo n day@Friday,!!

8!AM!@!4!PM!Central!Time.!A!copy!of!the!sales!receipt!is!required.

FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY

FOR FUTURE REFERENCE.!

Carbon Monoxide Gas: When in operation, the exhaust from this product contains poisonous carbon monoxide gas.

Carbon monoxide gas is both odorless and colorless AND may be present even if you do not see or smell gas.

Breathing this poison gas can lead to headaches, dizziness, drowsiness, loss of consciousness and eventually death.

• Use this product ONLY outdoors in non-confined areas.

• Keep at least several feet of clearance on all sides to allow proper ventilation for this product.

WARNING: CALIFORNIA PROP 65: According to the State of California, engine exhaust and some of its constituents

from this product are know to contain chemicals known to cause cancer, birth defects, or other reproductive harm.

WARNING: CALIFORNIA PROP 65: According to the State of California, this product contains or emits chemicals

known to cause cancer, birth defects and other reproductive harm.

Summary of content (16 pages)

PAGE 1
GPDR 2-CYCLE GASOLINE POWERED PILE DRIVER ASSEMBLY & OPERATING INSTRUCTIONS READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur.
PAGE 2
INDEX I II III IV V VI VII VIII IX X XI Part Information / Specifications .......................................................................................... 2 Description of Safe Operation .............................................................................................. 4 Use and Function ................................................................................................................ 4 Preparation before Use ..............................................................
PAGE 3
4 5 2 1 6 9 7 8 PART INFORMATION No. Name 1 Combination Switch 4 Regulating Switch 7 Hammer Socket 10 Grip 13 Handle 16 Air Filter 19 Fuel Bubble No. 2 5 8 11 14 17 20 Name Stop Switch Throttle Switch Piling Socket Damping Spring Spark Plug Fuel tank Cap Steel Cover No.
PAGE 4
READ SAFE OPERATION REQUIREMENTS 1. The operator must wear slip-resistant safety shoes and suitable clothing. For long-time operation, he or she must wear goggles, the helmet and earplugs. 2. While operating the machine, please keep balance of body; the user shall stand in front of Air Filter and operate the machine. While operating the machine, do not smoke, eat or chat. 3. After starting the machine, do not carry out one-handed operation. 4. While lifting the machine, do not pull Throttle Switch. 5.
PAGE 5
PREPARATION BEFORE USE 4.1 Piling Socket Assembly Fig 2 Fig 1 Fig 3 Fig. 1 ) Locate Pile Driver, Piling Socket & Inner Pile Head. Fig. 2 ) Attach Piling Socket by screwing it onto Pile Driver. Fig. 3 ) Make sure Piling Socket is secure. Fig 4 Fig 5 Fig 6 Fig. 4 ) Insert Inner Pile Head. Fig. 5 ) Insert Piling Socket Pin then rotate. Using a mallet, hammer into Piling Socket until secure. Fig. 6 ) Piling Socket is assembled. Fig 7 Fig 8 Fig 9 Fig.
PAGE 6
. Unscrew gas cap slowly to vent, add the remainder of fuel requirements 7. Wipe away any spilled fuel or oil and allow to evaporate before moving or transporting. STARTING Before starting the new machine, press the transparent and semi-circle fuel bubble repeatedly (Fig.12) until Carburetor is filled with fuel. (If the engine is cool, close the air door. Open air door after starting.) Start Button and OFF of cold engine) Fuel Bubble Fig.12 Set the machine upright according to Fig.12.
PAGE 7
TURNING OFF MOTOR 7.1 Release throttle handle and carry out idle running of the machine for 3-5 minutes. Pull Stop Switch to the position of flameout. See the position of Stop Switch in Fig.13. Stop Switch S T P Fig.13 MAINTENANCE 8.1 Air Filter Check air filter regularly. Soot deposit blocking filter element of air filter will reduce power of gasoline engine and service life.
PAGE 8
.3 Carburetor Fuel tank and carburetor generally have residual oil. After some time, the residual oil will become greasy oil which block up the oil line, causing that the engine can’t be started. Therefore, when the machine is not used for more than one week, be sure to completely take the fuel out.
PAGE 9
TROUBLESHOOTING Problem analysis and solving Example 1: Difficulties in starting cool engine.
PAGE 10
MAINTENANCE CYCLE tightness of √ screws) Clean Control handle/stop button Air Filter Fuel Filter Petrol Tank/Petrol Tank cover Gear Box/Cylinder Silencer Cylinder Cooling Fin Spark Plug √ √ Function check √ √ Clean √ √ Replace √ Check √ Replace √ Clean √ Check √ √ √ Tighten √ Clean √ Add oil √ Check √ Remove carbon deposit √ Check √ Clean √ Check/Adjust the distance between electrodes √ Replace Screw and Nut If necessary The whole machine Temporary Failure Ou
PAGE 11
PARTS LIST Parts No. Qty Parts No.
PAGE 12
34 Grip 1 35 Handle Soft Case 1 36 Impact Crank 1 37 Needle Roller Bearing HK152316 1 38 Shock Linkage 1 39 Shield Ring 1 40 Inner Hexagon Cheese-head Screw M6×16 1 12
PAGE 13
PARTS DIAGRAM 13
PAGE 14
PARTS LIST Parts No. 1-1 1-2 Cross Recessed Pan Head Combination ScrewM5×20 Starter Parts No. Name 13 1-41 Air Filter Cover 1 1 1-42 Air Filter Press Plate 1 Qty Qty 1-3 Starter Al Gasket 1 1-43 Filter Element 1 1-4 Type 1 Hexagon NutM8×1.25 1 1-44 Air Filter Base Com. 1 1 1-45 Carburetor 1 1 1-46 2 1-47 Air Inlet Tube 1 Air Inlet Tube Gasket 1 1-5 1-6 1-7 Start Reel Type 1 Hexagon NutM8×1.
PAGE 15
M5×55 1-33 Muffler 1 1-34 Muffler Gasket 1 1-35 Cylinder Top Cover 1 1-36 Cylinder Cover 1 1-37 Inner Hexagon Cheese-head Screw M5×20 4 1-38 Spark Plug 1 1-39 1-40 Cross Recessed Pan Head Combination ScrewM5×22 Butterfly Screw M5×9 2 1 15
PAGE 16
PARTS DIAGRAM 16