Replacement Part List

4
!
READ SAFE OPERATION REQUIREMENTS
1. The operator must wear slip-resistant safety shoes and suitable clothing. For long-time
operation, he
or she must wear goggles, the helmet and earplugs.
2. While operating the machine, please keep balance of body; the user shall stand in front of Air
Filter and operate the machine. While operating the machine, do not smoke, eat or chat.
3. After starting the machine, do not carry out one-handed operation.
4. While lifting the machine, do not pull Throttle Switch.
5. Non-staff shall stay away from operating area to avoid injury.
6. Select the medium speed to operate pile driver.
7. Keep the handle dry and clean without greasy oil or fuel mixture.
8. If operation is stopped midway: turn off the engine.
9. Always check whether fastening screws of the connector is tightened before use. If it’s loose, you
must tighten the screws before use. DO NOT USE pure gasoline (without adding appropriate
two-stroke engine oil).
10. Gasoline is highly flammable. Therefore, replenish fuel in a well-ventilated environment. During
fuel
filling, gasoline engine must be turned off.
11. Do not over fill. The oil shall not exceed the neck of oil filer of Fuel Tank. If fuel spills, wait until
the fuel volatilizes completely and then start the machine.
12. After refueling, tighten the oil lid. During operation, check whether Fuel tank is damaged and
spills
frequently. If damage is found, turn off the machine immediately for replacement.
13. While pile driver is used in closed areas of work environment such as tunnels, trenches and
deep
groove, it’s necessary to guarantee normal air circulation to avoid waste gas poisoning
and
suffocation.
14. Forbid quick acceleration or braking so as not to damage the machine.
15. Before transport, empty fuel inside Fuel Tank to avoid leakage.
16. Non-professional maintenance staff are prohibited from dismounting pile driver to avoid
structural
damage of parts, shortened service life of pile driver or accidents.
USE AND FUNCTION
3.1 Use: Use for outside piling operation of farms, orchard fences or barriers.
3.2 Function
3.2.1 Lightweight and low discharge capacity.
3.2.2 Reduces working strength of the operator to the greatest extent, and boasts simple and
comfortable operation. The operator can achieve 360° all-around
operation.
3.2.3 It can regulate impact energy and impact frequency and apply to a variety of piles less than
68mm in
diameter.
3.2.4 Advantage: Save the trouble of using heavy machines such as generator, air compressor,
and
trucking-lorry.
3.2.5 The operating handle of the machine is rubber and plastic sponge handle which can greatly
reduce the
recoil force of the machine. It’s installed with two-way Damping Spring which makes the
user more
comfortable.