Replacement Part List

PREPARATION BEFORE USE

4.1 Piling Socket Assembly

Fig. 1 ) Locate Pile Driver, Piling Socket & Inner Pile Head.

Fig. 2 ) Attach Piling Socket by screwing it onto Pile Driver.

Fig. 3 ) Make sure Piling Socket is secure.

Fig. 4 ) Insert Inner Pile Head.

Fig. 5 ) Insert Piling Socket Pin then rotate. Using a mallet, hammer into Piling Socket until secure.

Fig. 6 ) Piling Socket is assembled.

Fig. 7 ) To disassemble, remove Piling Socket Pin by using a mallet.

Fig. 8 ) Remove Piling Socket Pin.

Fig. 9 ) Unscrew Inner Pile Head.

4.2 MIXING GAS/OIL FUEL

Use only quality gasoline and two-stroke special engine oil

Recommended mixing ratio:

1. Fuel must be mixed in a container

outside in a well ventilated area.

2. Fill certified fuel container 1/4 full of recommended fuel.

3. Add recommended amount of 2 cycle oil.

4. Screw container cap on straight and tight.

5. Shake the container to mix fuel and oil.

Fig 1

Condition

Gasoline : 2-Cycle Engine oil

Operation within 20 hours

20:1

Operation of over 20 hours

25:1

Fig 2

Fig 3

Fig 5

Fig 6

Fig 4

Fig 8

Fig 9

Fig 7