User Manual

Items needed (not included)
2 servos (steering servo with 80 oz/in of
torque or greater recommended)
Receiver
Rechargeable 5-cell flat receiver pack
(DYN1415 recommended)
Switch harness
Servo tape
Items needed-(included)
Steering Arm (SWK3108)
Servo Adaptors (SWK3108)
Steering Linkage (SWK2550)
Antenna (SWK3114)
Antenna Cap (SWK3114)
Switch Cover (SWK3118)
8-3x10mm Button-Head Screws (SWK2226)
2-2x10mm Switch Mounting Screws
(SWK2306)
2-3x8mm Flathead Screws (for servo arms)
(SWK2024)
2-3mm Cone Washers (SWK3108)
6.8mm Pivot Ball (SWK2470)
3mm Locknut (SWK2382)
Note:While it’s possible to install the radio system in the Mayhem™ without removing the radio tray
and radio box from the buggy, it’s much easier and recommended that the radio tray and box be
removed from the chassis during radio installation.
A
A
Page 13
Radio System Installation