User Manual

Note:A clear protective film is applied to the
outside of the body to protect it from
overspray during painting. Remove this film
after painting.
The body comes cut, trimmed and mounted—
ready for paint. Before painting, clean the inside
of the body with warm soapy water to remove
any remaining mold release that may be present
from the manufacturing process. Use masking
tape to tape the windows. Stencils are available
through several manufacturers (like Parma) that
can be used to create elaborate paint effects, or
striping and masking tape can be used to create
color separation lines. Be sure to use high-quality
polycarbonate paint.
Page 19
Painting the Body