User's Manual

Getting Started 6

PACKAGE CONTENTS

• One (1) Tracker

• One (1) Tracker mounting bracket

• One (1) Keypad (pre-paired with Tracker)

• One (1) Keypad mounting bracket

• Two (2) FOBs (pre-paired with Tracker)

• One (1) Adhesive tape for testing Tracker pre-installation

• One (1) Cable assembly (Line power cord - 18 gauge, 6 ft long;

Pair of Sensor Alert wires – 20 gauge, 6 ft long)

• Eight (8) #6 - 3/8” stainless steel screws for plastic/berglass and

sheet metal for Tracker and Keypad mounting brackets.

• One (1) 18” USB cable

• Four (4) AA lithium batteries for Tracker

• Four (4) CR2032 coin cell lithium batteries (2 for Keypad and 1 for

each FOB)

• One (1) Quick Start Guide

• One (1) Quick Reference Guide (for Keypad)

WHAT TOOLS YOU’LL NEED FOR INSTALLATION

• Power drill

• Drill bits to t #6 screws

• #1 screwdriver to remove and reattach battery compartments on

Keypad and Tracker

• #2 Philips head screwdriver for mounting brackets

• Cable crimper (Note: All wires will have marine grade butt connectors

size 22g-18g attached for easy crimping and attachment of accessory

wires. Also, this provides built in protection for unused wires.)

• Wire cutter

• Socket wrench to remove bolts on 12V or 24V batteries

Please read through the user guide to familiarize yourself with the SPOT

HUG contents, system set-up and usage.

HUG can be installed by the individual user or by a qualiﬁed marine

electronics installer.

Service activation is required to begin using any of the HUG features.

Visit ﬁndmeSPOT.com to activate or follow the procedures in

the Service Activation section within this user guide.

SPOT HUG USER MANUAL