User's Manual

How the LEDs Blink 23
BY FUNCTION FOR TRACKER, KEY FOB/KEYPAD
SPOT HUG USER MANUAL
LED LED ACTIVITY GREEN RED
Power When connected to line power Solid
When using batteries only Blinking
If GPS or satellite transmitter self-test fail Power/GPS/SOS
all blink red
If battery power is low Blinking
GPS GPS fix Blinking
No GPS fix Blinking
If GPS or satellite transmitter self-test fail Power/GPS/SOS
all blink red
SOS When SOS is sent Blinking
If GPS or satellite transmitter self-test fail Power/GPS/SOS
all blink red
Check-in/OK
Track Progress
Help/SPOT Assist
SOS Emergency
Function LED blinks
green until the message
cycle is completed or
canceled
GPS LED
blinks green
Blinks green after
transmitting the most
recent message as
appropriate for each
function and for one (1)
hour after the message
cycle ends
Message and location
transmitted to the
satellites
IF TRACKER FINDS YOUR GPS LOCATION (KEYPAD AND KEY FOB)
FUNCTION MESSAGE FUNCTION LED GPS LED MESSAGES SENDING LED MESSAGE STATUS
(Keypad only)
IMPORTANT NOTES
1. The blinking green LED within each function button lets you know you have successfully engaged that function.
2. After you engage the function, HUG looks for a GPS signal and location as indicated.
3. Once the GPS location is obtained, HUG sends your message and the GPS and Message Sending LEDs blink green together
for 15 seconds, indicating a successful GPS fix and starting the message sending cycle.