User's Guide

Globalstar Sat-Fi2 RAS User Guide
Page 7
SAT-FI2 RAS OVERVIEW
Sat-Fi2 RAS at a Glance
• Power LED - Displays Power status
• Satellite LED - Displays Satellite connectivity status
• S.O.S. LED - Displays S.O.S. status
• Power Switch - Turns device on/off
• 12 VDC Input - Use with 12 V charger to power the device
• Ethernet Port - Use for direct data connections (Sat-Fi2 desktop app required - coming soon)
• Wi-Fi Antenna - Broadcast Wi-Fi connection
• RX (Coaxial Antenna Cable) - Receive data from the Globalstar satellite network
• TX (Coaxial Antenna Cable) - Transmit data to the Globalstar satellite network
• GPS Antenna Connection - To acquire GPS signal
Sat-Fi2 RAS LEDs
LED STATUS POWER LED SATELLITE LED S.O.S. LED
POWERING ON
All LEDs blink Green in forward/reverse direction until the Sat-Fi2 RAS powers on
CONNECTED
TO SATELLITE
Normal Blinking Green Normal Blinking Green Off
NOT CONNECTED
TO SATELLITE
Normal Blinking Green Normal Blinking Red Off
S.O.S. CONNECTING MODE
Normal Blinking Green Normal Blinking Green or Red Solid Green
S.O.S. ESTABLISHED MODE
Normal Blinking Green Normal Blinking Green or Red Normal Blinking Green
CANCEL S.O.S. MODE
Normal Blinking Green Normal Blinking Green or Red Normal Blinking Red
LED PATTERN DEFINITIONS
• Normal Blinking: Slow blink rate
• Forward/Reverse: LED pattern scrolls green from the Power - Satellite - S.O.S. LEDs then all three blink green
• Solid On: LED stays continuously illuminated
Power LEDEthernet Port Satellite LED S.O.S. LED
Power Switch12 VDC Input
Wi-Fi Antenna
GPS Antenna Connection
RX (Coaxial Antenna Cable)
TX (Coaxial Antenna Cable)