User's Guide

Globalstar Sat-Fi2 RAS User Guide

Page 40

SYSTEM UPDATE

Sat-Fi2 RAS ﬁrmware updates can be performed via the Sat-Fi2 App or using the Sat-Fi2 Web Console. The below

instructions detail the process for updating the Sat-Fi2 RAS using the Sat-Fi2 Web Console.

Step 1 – Download Sat-Fi2 RAS Firmware Update

1. Prior to downloading the update, delete any previous versions of Sat-Fi2 RAS “update.zip” that are

in your download directory.

2. On a Wi-Fi enabled computer, open a web browser and proceed to

https://www.globalstar.com/products/voice-and-data/sat-ﬁ2RAS

3. Scroll to Downloads and Links section and download the Latest Sat-Fi2 RAS Firmware Update.

4. Save the update to your computer, do not attempt to run the program directly.

Step 2 – Connect to the Sat-Fi2 RAS Wireless Network

1. On a laptop, turn on the Wi-Fi connection and connect to the satﬁ2<XXXXXX> network (<XXXXXX>

is the ICCID number of the Sat- Fi2 RAS device) Example: satﬁ2_004595

2. A Wi-Fi connection dialog will be displayed. In the Password text-entry ﬁeld, enter the appropriate

password. (Default Password is satﬁ1234)

3. Press the Connect button.

Step 3 - Access the Sat-Fi2 Web Console

1. Open a web browser.

2. In the address bar enter: http://192.168.1.1:8080

3. A Sat-Fi2 Login screen will be displayed.

• In the Username ﬁeld, enter the Admin Username (Default is admin)

• In the Password ﬁeld, enter the password (Default is admin)

• Select the Login button.

4. The Sat-Fi2 Admin Console screen will be displayed.

Step 4 – Perform Firmware Update

1. On the Admin Console Menu screen select Device Conﬁguration.

2. The Device Conﬁguration screen will be displayed, select the System Update tab.

3. Select the Choose File button and navigate to and select the Sat-Fi2 RAS ﬁrmware update

downloaded in Step 1 – Download Sat-Fi2 RAS Firmware Update. The update must be named

“update.zip” any other name will result in a failure to update.

4. Select the Upload button to start the ﬁrmware upload process.

WARNING: Once the Upload button has been selected, do not power off the Sat-Fi2 RAS unit

during the upgrade process. Doing so may render the device inoperable.

5. After the ﬁrmware is uploaded the Update process will begin.

6. When the ﬁrmware update is complete the Sat-Fi2 RAS will reboot and you will be disconnected

from the Sat-Fi2 RAS Wi-Fi network. The Firmware Update is complete.