Product Info

GLOBALSTAR PROPRIETARY AND CONFIDENTIAL INFORMATION
Use or disclosure of data contained on this sheet is subject to the restrictions in the Distribution Statements on the title page of this
document.
06/18/20 Subject to Change without Notice P a g e | 18
tested as acceptable.
2. The VAR/installer should review the pairing of solar panel / battery and determine if the solar panel is
adequate for use with the selected battery.
3. This value is based on the efficiency of the solar charger chip, which is typically 80-85%.
4. The solar panel should be chosen for outdoor use, if the end-application will be mostly outdoors.
2.8.4 14 Pin Connector
Table 3 – 14 pin Connector (Molex 5034801400)
Pin #
Signal Name
Description
Notes
1
3V0
3V supply
The 3V supply is only meant to
power loads less than 20mA
2
SWDIO
Bluetooth processor programming line
3
GND
PCB Ground
4
SWDCLK
Bluetooth processor programming line
5
GND
PCB Ground
6
SAT_DBG_DATA
ASIC programming line
7
SAT_DBG_CLK
ASIC programming line
8
SAT_DBG_EN
ASIC programming line
9
SAT_RST_N
ASIC reset
10
EXT_TX_CONN
External Serial Port Transmit
This is the Receive signal on the
Bluetooth processor.
11
EXT_RTS_CONN
External Serial Port Request to Send
This is a GPIO signal connected
to the Bluetooth processor
12
MCU/BLE_#RESET
Bluetooth processor reset
13
EXT_CTS_CONN
External Serial Port Clear to Send
This is a GPIO signal connected
to the Bluetooth processor
14
EXT_RX_CONN
External Serial Port Receive
This is the Transmit signal on the
Bluetooth processor.
Notes
1. The mating cable for Molex 5034801400 is Molex part # 0152660153, or equivalent.