Product Info

GLOBALSTAR PROPRIETARY AND CONFIDENTIAL INFORMATION
Use or disclosure of data contained on this sheet is subject to the restrictions in the Distribution Statements on the title page of this
document.
06/18/20 Subject to Change without Notice P a g e | 68
Flash One Line Message response
Byte
Bits
Parameter
Description
0
0-7
Leader
Always a value of 0xAA.
1
0-7
Length
0x06
2
0-7
Command
0x61
3
0-7
Response Code.
Response codes with the MSB set
are “NAKs” or “fails” and indicate
that the bootloader didn’t do
anything with the record. Codes
without the MSB set are various
success codes, indicating that the
message was acted on as
expected.
0x01 = OK but not done loading.
(Returned for each line loaded
until End of File is received.)
0x00 = OK and done. (This is the
response to End of File when
loaded code has passed
acceptance tests.
0xF0 = Address outside of
application memory range. (In the
ST100 board, this code is also
returned if “processor number” is
not 0.)
0xFF = Message format error or
unknown error.
4-5
0 – 15
CRC