Safety Notice

Spotwave Wireless Inc.
7
3 – Installation
3.1 Preparing for installation
The following are general considerations and preparations that should
be looked at before installing the SpotCell 100.
3.1.1 Signal Strength
The SpotCell 100 system brings signals from an area of adequate
coverage to an area with poor or non-existent coverage. It is the DDU
which captures a good signal, and the SCU that provides the signal to
the area with poor cell phone coverage. The DDU can be mounted
inside or outside, as long as it is in an area where your cell phone works
(even if your cell phone is only marginally working). Generally, the
better your cell phone works at the location the DDU is mounted, the
better the system will perform.
3.1.2 DDU Height
In fringe or densely built-up areas, locating the DDU as high as possible
will provide optimal performance.