Safety Notice
Table Of Contents
- 1 – Introduction
- 2 – Getting Started
- 3 – Installation
- 4 – Mounting
- 5 – Displayed Information
- 6 – Trouble Shooting Information
- Appendix A – Applications overview
- Appendix B – System Specifications
- Appendix C – Safety Hints
Spotwave Wireless Inc. 11
8.
Again, rotate the DDU as in step 6, this time stopping each time the
LED is green and note the direction the DDU is facing (the LED
may turn green once or multiple times). This is an indication of
the signal strength the DDU is receiving from the cellular phone
tower. The DDU should be mounted facing the direction the DDU
was pointed for the longest period of time the LED was green
during its rotation.
9.
For inside installation and exterior wall mountings, it is
recommended that various walls and locations within the structure
be tested as suitable locations to position the DDU. For each
location the DDU is tested and the LED is green, the display on the
bottom of the SCU indicates the relative signal strength that the
DDU is receiving.
Figure 3.3: Displayed signal strength
Mount the DDU in the location that has the highest indicated
signal level.
Note: With some tall buildings, it may be necessary to tilt the DDU
down to get a good signal (green LED).
10.
Proceed to page 15 for mounting instructions once the DDU
location has been optimized.