Safety Notice
Table Of Contents
- 1 – Introduction
- 2 – Getting Started
- 3 – Installation
- 4 – Mounting
- 5 – Displayed Information
- 6 – Trouble Shooting Information
- Appendix A – Applications overview
- Appendix B – System Specifications
- Appendix C – Safety Hints
Spotwave Wireless Inc.
15
4 – Mounting
All necessary hardware required for mounting on internal/external walls,
or pipes is included in the mounting kit.
4.1 Running the cable through a wall
If it is necessary to run a cable through a wall, use a masonry or wood
drill bit to drill a 5/8-inch diameter hole.
After passing the cable through, use the putty in the installation kit to
fill the hole around the cable.
4.2 Mounting the DDU
The DDU may be indoor or outdoor mounted. Locate the source to
which the DDU will point and consider the possible mounting
locations.
The following illustrations show some of the possible mounting options.
Note: Mount the angle bracket on the flanged side of the mounting
bracket and use the two mounting holes if no movement is required.