Safety Notice
Table Of Contents
- 1 – Introduction
- 2 – Getting Started
- 3 – Installation
- 4 – Mounting
- 5 – Displayed Information
- 6 – Trouble Shooting Information
- Appendix A – Applications overview
- Appendix B – System Specifications
- Appendix C – Safety Hints
D
ISPLAYED
I
NFORMATION
26
SpotCell 100, Release 1.0
5.2 SCU
The SCU displays system status and signal strength. The following table
shows the various messages displayed and if necklaces, what action
should be taken.
Display with alternating display (if present) Action (if required)
Check the RF cable and
verify that it is connected
properly. Make sure the
length of the RF cable is
less than 50 meters.
Call product support.
The signal may be too
weak or interfered with by
strong adjacent signals.
Turn the DDU to another
appropriate position.
Move the SCU to an
alternate location,
preferable farther away
from the DDU.
Table 1: SCU Display States
System OK
OUT OF SERVICE
System Fault xxx
CHECK CABLE
CONNECTIONS
CALL PRODUCT
SUPPORT
OUT OF SERVICE
System Fault xxx
Poor Signal xxx
Try turning DDU
Poor Signal xxx
Searching . . . .
Y ..:|| CHxxx
O. MOVE SCU