User's Manual
Table Of Contents
- 1 – Introduction
- 2 – Getting Started
- 3 – Installation
- 4 – Mounting
- 5 – Display Information
- 6 – Trouble Shooting Information
- Appendix A – SpotCell 100 System Specifications
- Appendix B – SpotCell 111 System Specifications
- Appendix C – SpotCell 112 System Specifications
- Appendix D – Safety Hints
Spotwave Wireless Inc.
5
2.2 Unpacking and inspecting
Physically inspect the box for shipping damage before unpacking the
SpotCell.
1.
Remove the SpotCell components from the box.
2.
Remove all packing material from the Donor Unit (DU) and the
Coverage Unit (CU). Save the packaging in case the SpotCell is ever
stored or shipped to SpotWave for service.
3.
Check the contents of the package to make sure you have received
everything ordered and verify that the mounting kit contains all the
listed parts.
4.
Check the DU and CU for shipping damage. Pay particular
attention to the unit’s outer shell casing.