User's Manual
Table Of Contents
- Technical Support
- Important Safety Information
- LIMITED WARRANTY AND LIMITATION OF LIABILITY:
- 1 - Introduction
- 2 - Getting Started
- 3 - Installation
- 4 - Mounting the DU and CU
- 5 - Display Information
- 6 - Trouble-Shooting
- Appendix A - SpotCell 100 System Specifications
- Appendix B - SpotCell 111/112 System Specifications
- Appendix C - SpotCell 163 System Specifications
- Appendix D - SpotCell 167 System Specifications
- Appendix E - SpotCell 141/142 System Specifications
- Appendix F - Safety Hints
DISPLAY INFORMATION
22 SpotCell® 100 Series
5.2.1 LCD
The CU LCD displays system status and signal strength. The signal strength is indicated
by the signal strength bars ( ) and the coverage strength is indicated by the coverage
bars ( ).
The following table shows the various messages displayed and if necessary, what action
should be taken.
Display with alternating display (if present) Action (if required)
Initializing.
No action required.
System is not
optimally positioned.
Turn the DU to
another appropriate
position.
System will not
function.
Turn the DU to
another appropriate
position.
Turn the DU to
another appropriate
position.
Check the RF cable
and verify that it is
connected properly.
Make sure the length
of the RF cable is less
than 75 meters.
Call product support.
Tel ep hone # :
1-877-610-9586
Table 1: CU Display States