User's Guide

SPOTCELL 100 SERIES SPECIFICATIONS
Spotwave Wireless Inc. 35
AC cable length: 6-ft DC cable length: 20-ft (both non-plenum)
Downlink
Operating
Range
-106 to -44-dBm (Rx Isotropic Power), coverage reduced below -92-dBm
Input Over-
load Protec-
tion
Uplink: Fully adaptive
Downlink: Fully adaptive
Output Lev-
els (EIRP,
composite
radiated)
Uplink: Fully adaptive,
up to 30-dBm maximum.
Downlink: Fully adap-
tive, up to 7 dBm maxi-
mum (managed per
channel at -8 dBm/ch)
Uplink: Fully adaptive,
up to 30-dBm maximum.
Downlink: Fully adap-
tive, up to 7 dBm maxi-
mum (managed per
channel at 0 dBm/ch)
Uplink: Fully adaptive,
up to 30-dBm maximum.
Downlink: Fully adap-
tive, up to 7 dBm maxi-
mum (managed per
channel at 0 dBm/ch)
Third Order
Intercept
(EIRP radi-
ated)
Uplink: 52-dBm
Downlink: 30-dBm
Uplink: 52-dBm
Downlink: 30-dBm
Uplink: 50-dBm
Downlink: 30-dBm
Power Supply AC Input Voltage: 100-V to 240-V 50/60-Hz
DC Output Voltage: 7.5-V DC (1.8-A) and 10.25-V DC (1.0-A)
Power Consumption: < 28-W
CSA approved power adapter c/w 6-ft non-plenum AC cable and 20-ft non-plenum
DC cable. DC cable connects to CU. DU powered from CU by interconnecting RF
cable.
AC cable length: 6-ft (non-plenum)
DC cable length: 20-ft (non-plenum)
* System Gain includes antenna gains and cable loss [82-ft of RG-6 or 164-ft of RG-11 (non-plenum
rated)].
Note: longer cable lengths or plenum cable can often be accommodated with no coverage penalty.