User's Guide
Table Of Contents
- 1 - Introduction
- 2 - Getting Started
- 3 - Mounting the DU
- 4 - Installation
- 5 - Display Information
- 6 - Trouble Shooting Information
- Appendix A - SpotCell 100 Series Specifications
- Appendix B - SpotCell 111 System Specifications
- Appendix C - SpotCell 112 System Specifications
- Appendix D - SpotCell 111s/112s System Specifications
- Appendix E - SpotCell 163 System Specifications
- Appendix F - SpotCell 141/142 System Specifications
- Appendix G - Safety Hints
SPOTCELL 100 SERIES SPECIFICATIONS
36 SpotCell
A.2.1 Physical
A.2.2 Installation
A.2.3 Diagnostics
Operating Temperature DU & HPCU: -40° to +55° C
ARU: -40° to +55° C (with heater)
Size DU & HPCU: 14"w 10.5" h 3.5" d
ARU: 10" w 18"h 7" d
Weight DU & HPCU: 4-lb.
ARU c/w battery: 25-lb.
RF Connectors Typ e F
RF Cable 2-RG-11 Quad shielded required, 1-41’supplied
1- ordered for required length
(System supports up to 164 ft. or 50 m)
Installation Time Less than one hour typical
Outdoor Unit
Alignment
No prior knowledge of base station location required
Built in alignment algorithm (LED Indicator on outdoor unit)
Te s t E q u i p m e n t None required. No RF knowledge required for installation
User Controls None, setup and operation is fully automatic
Fault Indicators LED on DU (installation only)
LED on HPCU (during normal operation)
ARU (wireless modem, LCD display, AC power light)
Remote Connectivity Ethernet port on ARU and wireless modem
System Interrogation Multifunction LCD indicator ARU