User's Guide
Table Of Contents
- 1 - Introduction
- 2 - Getting Started
- 3 - Mounting the DU
- 4 - Installation
- 5 - Display Information
- 6 - Trouble Shooting Information
- Appendix A - SpotCell 100 Series Specifications
- Appendix B - SpotCell 111 System Specifications
- Appendix C - SpotCell 112 System Specifications
- Appendix D - SpotCell 111s/112s System Specifications
- Appendix E - SpotCell 163 System Specifications
- Appendix F - SpotCell 141/142 System Specifications
- Appendix G - Safety Hints
SPOTCELL 111S/112S SYSTEM SPECIFICATIONS
Spotwave Wireless Inc. 47
Input Overload Protection Uplink: Fully adaptive
Downlink: Fully adaptive
Maximum Output Levels
(radiated)
Uplink: Fully adaptive, up to +27 dBm EIRP (Composite)
Downlink: Fully adaptive up to +7 dBm EIRP (Composite)
Rated downlink output per carrier is 0dBm for a maximum
of five carriers. If number of carriers exceeds five, per carrier
power is reduced such that the composite downlink power
never exceeds +7dBm EIRP for a nominal antenna gain of
0dBi
Third Order Intercept
(radiated)
Uplink: +50 dBm EIRP
Downlink: +30 dBm EIRP
Power Supply 10.5 VDC universal power adapter that connects to the
Indoor Unit; Donor Unit power is supplied via the RF cable
Power Consumption < 44 W