User's Guide

Spotwave Wireless Inc. 7
3 – Mounting the DU
All necessary hardware required for mounting on internal/external walls,
or pipes is included in the mounting kit.
3.1 Running the cable through a wall
If it is necessary to run a cable through a wall, use a masonry or wood
drill bit to drill a 5/8-inch diameter hole.
After passing the cable through, use the putty in the installation kit to
fill the hole around the cable.
3.2 Mounting the DU
The DU may be indoor or outdoor mounted. Based on the direction the
DU will point, consider possible mounting locations.
The illustrations on the following pages show some of the possible
mounting options.