User Manual

INSTALLATION
16 SpotCell
®
2500Xe
The unit should be mounted as high on the wall as possible.
Note: The CU is designed to be mounted only in
a vertical orientation. Do not mount the CU
horizontally as this may cause the unit to exceed
its normal operating temperature.
2.4.1 Positioning the CU
Before positioning the CU, ensure that the DU position has been optimized and the DU
has been mounted in place.
To position the CU
1. Place the CU in the area needing coverage, but do not physically mount at this time.
2. Temporarily connect the cable from the DU to the port labelled on the top of
the CU.
Figure 2.9: Connect CU to DU
3.
Connect the power supply to the CU, and then plug the adapter into an AC outlet.