MSDS

MATERIAL SAFETY DATA SHEET
REVISION: 0 ISSUE DATE: 2015-4-28
SECTION 6 ACCIDENTAL RELEASE MEASURES
In Water:
Personal Protection:
Local Exhaust Mechanical (General)
Not necessary under conditions of Normal use.
Special
Not necessary under conditions of Normal use.
Other (Specify)
Not necessary under normal operation conditions.
Other Protective Clothing and Equipment
Not necessary under normal operation conditions
Place material into suitable containers, If the skin has come into contact with the electrolyte, it should be washed thoroughly with water, Sand or earth should be used to absorb any exuded
If possible, remove from water far from body in special fixture, and call local fire/police department to ask for help
Glove protection: Not necessary under normal operation condition.
Foot Protection: Steel toed shoes recommended for Large container handling.
material; Do not directly heat or solder; do not throw into fire; do not place cell/battery in non conductive trays.
SECTION 5 FIREFIGHTING MEASURES
Extinguisher Media:
Special Fire-Fighting Procedures:
SECTION 8 EXPOSURE CONTROLS & PERSONAL PROTECTION
Engineering Controls:
material. Seal leaking battery and contaminated absorbent material should be treated by local regulation, and call local fire/police department to ask for help.·
Improper handling of lithium ion battery may result in injury or damage from electrolyte leakage, heating, ignition or explosion. So do not crush, pierce, short cell/battery terminals with conductive
No special protective clothing required for handling individual cells in corrective operational method.
Stora
g
e:
SECTION 7 HANDING AND STORAGE
Handling:
Store the battery in a cool, drying place, without chemical vapor or excessive humidity.
CO
2
or dry chemical power
In case of fire in cell original containers, use CO2 or dry chemical extinguisher; For fire in an adjacent area, water can be used.
On Land:
Ventilation to Be Used
Not necessary under conditions of Normal use.
Take all precautions mentioned in this document and operate the battery within the temperature range of -20℃ and 45℃.
keep away from heat and open flame, prevent hard & sharp thing penetration, store in a cool & dry place.
Respiratory Protection: Not necessary under normal operations condition. SCAB required in the event of a fire.
Eye/Face Protection: Not necessary under normal operation condition.
Not
necessary
under
normal
operation
conditions
.
Hygienic Work Practices
Not necessary under normal operation conditions.
SECTION 9 PHYSICAL /CHEMICAL PROPERTIES
Specific Gravity (H2O=1):
LiCoO
2
:3.80
Graphite:2.0~2.2
Melting Point:
LiCoO2:1130℃ Graphite:3500-3900℃
Appearance and Odor:
SECTION 10 STABILITY & REACTIVITY DATA
Stability Conditions to Avoid:
Stable
Unstable
Incompatibility (Materials to Avoid)
Hazardous Decomposition Products
N/A
Hazardous Polymerization
Conditions to Avoid
May Occur
Will Not Occur
Do not charge the battery under high temperature conditions such as near a fire or in the direct sunlight.
Do not disassemble or modify the battery，
Organic solvent is a colorless liquid; Lithium salt is a white, crystalline and odorless power.
Do not heat or incinerate the battery，Never impact, pierce or crush the battery.
LiCoO
2
is a gray odorless power; Graphite is a black or odorless power;
Do not shot-circuit the battery by connect the positive and negative terminals with a metal material.
Do not allow the battery to get wet or be immersed in water.
Water, salted water, other solvent with water