User's Guide

Installation
Mounting the siren hub
IMPORTANT: Be sure that when choosing your location, that it
- Can easily be seen when the strobe is flashing.
- You can hear the alarm.
- There is a good 2.4GHz Wireless network.
- There is a wall socket nearby that is not controlled by a wall switch.
1.1 The siren hub (A) can be mounted on the wall or ceiling.
1.2 Remove the bracket (AA) from the siren hub (A) by turning it
counterclockwise.
1.3 Decide upon your placement position and attach the bracket (AA)
with either screws (L) or double-sided adhesive tape (F) .
A
A
1
A AAAAAA
/
GAA AA
10

Tastatur Einbauen
WARNUNG: Ihr Tastatursensor ist nicht mit dem Sabotageschalter
verbunden.Sie müssen die Halterung mit dem Sabotageschalter erst
auf der Rückseite des Tastenfelds montieren.
WICHTIG: Testen Sie vor der Installation an der Wand, die Schafschal-
tung und Unscharfschaltfunktionen an dem Ort, an dem Sie die Tastat-
ur montieren wollen, um sicherzustellen, dass das Funksignal
ausreicht, um den Sirenen-Hub zu erreichen
Installieren Sie die Tastatur nicht:
- Im freien.
- In der Nähe von großen Metallgegenständen oder Spiegeln, weil sie
manchmal Funkstörungen verursachen können.
- In der Nähe der Hauptverkabelung.
2.1 Bestimmen Sie Ihre Platzierungsposition und befestigen Sie die
Halterung entweder mit Schrauben (M) oder doppelseitigem
Klebeband (H).
2.2 Hängen Sie die Tastatur (B) in die Halterung (K).
2
M
H
B
K
33
