Instructions / Assembly

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Basic Torchiere Lamp

ASSEMBLY INSTRUCTIONS

This is a generic illustration and may not be identical to your lamp.

1. Place the base (A) on a level surface

2. Pull cord (A) through base (B) to tighten stem connections.

3. Screw lower column (C) onto base (A).

4. Screw the remaining columns into the lower column

until all columns are in place. Pull the cord to tighten.

• The number of columns with be specific to your actual lamp.

5. Place the shade (E) over socket (D) and tighten socket ring

(F), securing shade in place.

Important:

Check the lamp socket for information on the maximum wattage

recommended for your specific lamp.

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth. Do not use abrasives.

Save these instructions for Future Reference

VERSION#: SD-T

Made in China / Revision 10/26/16

PAGE 1
Basic Torchiere Lamp ASSEMBLY INSTRUCTIONS This is a generic illustration and may not be identical to your lamp. 1. Place the base (A) on a level surface 2. Pull cord (A) through base (B) to tighten stem connections. 3. Screw lower column (C) onto base (A). 4. Screw the remaining columns into the lower column until all columns are in place. Pull the cord to tighten. • The number of columns with be specific to your actual lamp. 5.
PAGE 2
Lámpara básica de Torcha INSTRUCIONES DE ASAMBLEA Esta es una ilustración genérica y puede que no ser idéntica a su lámpara. 1. Coloque la base (A) sobre una superficie plana. 2. El cable de tracción (A) a través de la base (B) para apretar las conexiones troncales. 3. Atornille columna inferior (C) en la base (A). 4. Atornille las columnas restantes en la columna inferior hasta que todas las columnas están en su lugar. Tire del cable para apretar.