Instructions / Assembly

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Basic Table Lamp

ASSEMBLY INSTRUCTIONS

This is a generic illustration and may not be identical to your lamp.

1. Place the lamp base on a level surface.

2. Screw the threaded rod (B) into socket assembly (A).

3. Adjust the knurl nut (C) onto the threaded rod (B).

This can be used to raise the shade a little if necessary.

• Fabric shaded lamps do not have a knurl nut.

4. Place shade (D) over threaded rod (B), and tighten finial (E)

securing the shade in place.

5. Insert bulbs into the bulb socket.

6. Turn on the lamp by using pull chains OR switch in line.

• Your lamp will have either pull chains or a line switch.

Important:

Check the lamp socket for information on the maximum wattage

recommended for your specific lamp.

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth. Do not use abrasives

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Version#: D-TL-P

Made in China / Revision 08/09/16

PAGE 1
Basic Table Lamp ASSEMBLY INSTRUCTIONS This is a generic illustration and may not be identical to your lamp. 1. Place the lamp base on a level surface. 2. Screw the threaded rod (B) into socket assembly (A). 3. Adjust the knurl nut (C) onto the threaded rod (B). This can be used to raise the shade a little if necessary. • Fabric shaded lamps do not have a knurl nut. 4. Place shade (D) over threaded rod (B), and tighten finial (E) securing the shade in place. 5. Insert bulbs into the bulb socket. 6.
PAGE 2
Lámpara de mesa básicos INSTRUCIONES DE ASAMBLEA Esta es una ilustración genérica y puede que no ser idéntica a su lámpara. 1. Ponga la base en una superficie plana. 2. Atornille la tuerca roscada (B) en la asamblea de la portalámpara (A). 3. Atornille la tuerca rodonda (C) en la tuerca roscada (B). Esto se puede utilizar para levantar la pantalla un poco si es necesario. • lámparas de tela pantella no tienen una tuerca moleteada. 4.