Instructions / Assembly

SCAN HERE
1
Assembly
A B
C D
3
Place the anchor over the middle of the trampoline leg with the center post firmly positioned in the centre of the
anchor.
Position the second anchor in similar fashion on the leg on the opposite side of the trampoline.
Use a rubber mallet to hammer the pegs into the ground. We recommend alternating between a front peg and a
back peg during installation to ensure the anchor is tight against the leg.
Ensure all of the pegs are installed to their full depth.
WARNING - Before installation, check for underground power, gas, telephone, water, and other utility lines
and pipes. Failure to do so could result in serious or fatal injury.
NOTE - On oval and round trampolines, we recommend positioning the anchors on either side of the
trampoline. For square trampolines, place the anchors on opposite corners. For the S155 model, 4 anchors are
required.