Instructions / Assembly

3
1
2
3
4
WARNING - Use the tools provided to fasten the nuts. Do not over tighten the nuts. Do not use
power driver, torque wrench, or drill.
TIP - Fastening the final two frame sections oen requires additional eort. Two people may be
required for assembly.
Connect and fasten one frame section at a time together with the large nuts and bolts. When finished, the
bolt head should be flush with the frame and face out from the center of the trampoline (the nut should
face the center).
Attach a center post to the middle of each leg section.
Then, in the order shown in the illustration, li the frame and evenly put the legs into the leg hole on the
frame. We recommend that two people work together to complete this step. One person to hold the frame
up and horizontal, and the other person to put the legs into the leg hole.