® Sprint PCS Service SM Sprint Power Vision Multimedia Phone MM-7500 by Sanyo ® www.sprint.com © 2005 Sprint Nextel. All rights reserved. No reproduction in whole or in part without prior written approval. Sprint, the “Going Forward”logo and other trademarks are trademarks of Sprint Nextel. Sanyo is a registered trademark of Sanyo Electric Co.,Ltd.
Table of Contents Welcome to Sprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii Section 1: Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1A. Setting Up Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Getting Started With Sprint PCS Service . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Customizing the User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 2C. Setting Your Phone’s Security . . . . . . . . . . . . . . . . . . . . . . . . . .89 Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 Using Your Phone’s Lock Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2G. Using the Contacts Directory . . . . . . . . . . . . . . . . . . . . . . . . .123 Displaying the Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124 Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 Finding Contacts List Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126 Contacts List Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SM 2K. Using Sprint PCS Ready Link . . . . . . . . . . . . . . . . . . . . . . . . .207 Getting Started With Sprint PCS Ready Link . . . . . . . . . . . . . . . . . . . .208 Making and Receiving a Sprint PCS Ready Link Call . . . . . . . . . . . .211 Adding and Editing Ready Link Contacts . . . . . . . . . . . . . . . . . . . . . . . .219 Erasing Ready Link List Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226 Updating Sprint PCS Ready Link Lists . . . . . . . . . . . . . .
SM 3C. Sprint Power Vision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .293 Getting to Know Sprint Power Vision . . . . . . . . . . . . . . . . . . . . . . . . . . .294 SM Exploring the Sprint Music Store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .295 Personalizing Your Service With On Demand . . . . . . . . . . . . . . . . . .299 Using Your Sprint PCS Phone as a Modem . . . . . . . . . . . . . . . . . . . . . .302 SM 3D. Sprint PCS Voice Command . . . . . . . . .
Welcome to Sprint Sprint is committed to bringing you the best wireless technology available. We built our complete, nationwide network from the ground up, so all your services – whether it’s Voicemail, Caller ID, email, or Sprint PCS Picture Mail – will work the same wherever you go on the Nationwide Sprint PCS Network. This guide will familiarize you with our technology and your new Sprint PCS Phone through simple, easy-to-follow instructions.
Introduction This Phone Guide introduces you to Sprint PCS Service and all the features of your new phone. It’s divided into four sections: Section 1: Getting Started Section 2: Your Sprint PCS Phone Section 3: Sprint PCS Service Features Section 4: Safety Guidelines and Warranty Information Throughout this guide, you’ll find tips that highlight special shortcuts and timely reminders to help you make the most of your new phone and service.
Section 1 Getting Started
2
Setting Up Service Section 1A Setting Up Service In This Section Getting Started With Sprint PCS Service Setting Up Your Voicemail Sprint PCS Account Passwords Getting Help Setting up service on your new Sprint PCS Phone is quick and easy.This section walks you through the necessary steps to unlock your phone, set up your voicemail, establish passwords, and contact Sprint for assistance with your Sprint PCS Service.
Getting Started With Sprint PCS Service Determining if Your Phone is Already Activated If you purchased your phone at a Sprint Store, it is probably activated, unlocked, and ready to use. If you received your phone in the mail, it probably has been activated; all you need to do is unlock it. If your phone is not activated, please refer to the Welcome to Sprint brochure included with your phone. Unlocking Your Phone To unlock your phone, follow these easy steps: 1. Press to turn the phone on. 2.
Setting Up Service Setting UpYour Voicemail All unanswered calls to your Sprint PCS Phone are automatically transferred to your voicemail, even if your phone is in use or turned off. Therefore, you will want to set up your voicemail and personal greeting as soon as your Sprint PCS Phone is activated. To set up your voicemail: 1. Press and hold . 2.
Sprint PCS Account Passwords As a Sprint PCS customer, you enjoy unlimited access to your personal account information, your voicemail account, and your Sprint PCS Vision account. To ensure that no one else has access to your information, you will need to create passwords to protect your privacy. Account Password If you are the account owner, you’ll have an account password to sign on to www.sprint.com and to use when calling Sprint Customer Service.
Setting Up Service Getting Help Visit www.sprint.
Receiving Automated Invoicing Information For your convenience, your phone gives you access to invoicing information on your Sprint PCS Account. This information includes balance due, payment received, invoicing cycle, and an estimate of the number of minutes used since your last invoicing cycle. (Normal airtime usage will apply.) To access automated invoicing information: Press Shift GHI . Note: This service may not be available in all Affiliate areas.
Setting Up Service Sprint PCS Operator Services Sprint PCS Operator Services provides assistance when placing collect calls or when placing calls billed to a local telephone calling card or third party. To access Sprint PCS Operator Services: Press . For more information or to see the latest in products and services, visit us online at www.sprint.com. Note: Sprint PCS Operator Services may not be available in all Affiliate areas.
10
Section 2 Your Sprint PCS Phone
12
Section 2A Your Sprint PCS Phone: The Basics FrontView of Your Phone Phone Basics In This Section Viewing the Display Screen Features of Your Sprint PCS Phone Turning Your Phone On and Off Using Your Phone’s Battery and Charger Displaying Your Phone Number Changing the Faceplate Making and Answering Calls Entering Text Your Sprint PCS Phone is packed with features that simplify your life and expand your ability to stay connected to the people and information that are important to you
Front View of Your Phone 1. Earpiece Sprint Sep 30,05 (Fri) 10:30 am 2. Main LCD Favorites Contacts 3. Softkey (left) 17. Softkey (right) 4. Navigation Key 16. Side Voice/Call Key 5. MENU/OK 15. BACK Key 6. Camera Key 14. Side Camera Key 7. TALK Key 13. END/POWER Key 12. SPEAKER Key 8. Microphone 11. Keypad 9. Accessories Connector 10. Charger Jack 18. Faceplate Release Button 19. Camera Lens 26. Headset Jack 20. Flash 27. Ready Link/ Memo Button 21. Normal/ Macro Switch 28.
Key Functions 1. Earpiece lets you hear the caller and automated prompts. 2. Main LCD (display) displays the phone’s main menu, features, modes, etc. bottom left line on the Main LCD. 4. Navigation Key lets you navigate quickly and easily through the menu options. You can access the menu shortcuts by pressing Right: On Demand, Left: Sprint TV, Up: Messaging, and Down: My Content. Phone Basics 3. Softkey (left) lets you select the menu corresponding to the 5.
16. Side Voice/Call Key lets you place calls by using Automatic Speech Recognition. 17. Softkey (right) lets you select the menu corresponding to the bottom right line on the Main LCD. 18. Faceplate Release Button lets you remove the faceplate. 19. Camera Lens the built-in camera lens lets you take pictures and videos. 20. Flash the built-in flash lets you take pictures and videos in low light. 21. Normal/Macro Switch lets you switch between normal and macro for close-up shots. 22.
Viewing the Display Screen Tip: To view a list of your phone’s icons and descriptions, from the main menu select Settings > Phone Info > Help. shows your current signal strength. The more lines you have, the stronger your signal. Phone Basics Your phone’s display screen provides a wealth of information about your phone’s status and options. This list identifies the symbols you’ll see on your phone’s display screen: means your phone cannot find a signal. indicates the call is on hold.
indicates you have missed voice calls. indicates you have missed Ready Link calls. indicates you have schedule events or call alarms. indicates you have alarm clock and/or countdown notifications. indicates you have picture messages, voicemail messages, text messages, and/or Voice SMS. indicates you have urgent messages. indicates you have two or more different types of missed calls, schedule events, call alarms, or alarm clock notifications. shows the level of your battery charge.
indicates Headset mode is set to Sprint PCS Ready Link and a headset is connected. indicates Headset mode is set to Voice Calls and a headset is connected. Note: Display indicators help you manage your roaming charges by letting you know when you’re off the Nationwide Sprint PCS Network and whether you’re operating in digital mode. (For more information, see Section 2D: Controlling Your Roaming Experience on page 101.) Phone Basics indicates the speakerphone mode is set to on.
The Contacts directory can store up to 500 entries with up to seven phone numbers per entry (page 123). A separate Sprint PCS Ready Link Contacts list provides easy access to up to 200 personal contacts and 200 company-provided contacts (page 211). The built-in Calendar offers several personal information management features to help you manage your busy lifestyle (page 138).
Turning Your Phone On and Off Turning Your Phone On To turn your phone on: Press . Once your phone is on, it may display “Looking for service...,” which indicates that your phone is searching for a signal. When your phone finds a signal, it automatically enters standby mode – the phone’s idle state. At this point, you are ready to begin making and receiving calls. Phone Basics If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated.
Using Your Phone’s Battery and Charger Battery Capacity Your Sprint PCS Phone is equipped with a Lithium Ion (LiIon) battery. It allows you to recharge your battery before it is fully drained. The battery provides up to 3.4 hours of continuous digital talk time. When there are approximately 5 minutes of talk time left, the battery icon turns red and the phone sounds an audible alert and then powers down.
Removing the Battery To remove your battery: 1. Make sure the power is off so that you don’t lose any stored numbers or messages. battery from the phone at a 45-degree angle. Phone Basics 2. Press the battery release latch up and remove the Charging the Battery Your Sprint PCS Phone’s LiIon battery is rechargeable and should be charged as soon as possible so you can begin using your phone. Keeping track of your battery’s charge is important.
Using the Charger To use the travel charger provided with your phone: Plug the round end of the travel charger into the phone’s charger jack and the other end into an electrical outlet. The icon on the phone lets you know the battery is fully charged. It takes approximately 4 hours to fully recharge a completely rundown battery. With the Sprint-approved LiIon battery, you can recharge the battery before it becomes completely run down.
Changing the Faceplate Removing and Installing the Faceplate To remove, press the faceplate release button down and remove the faceplate from the phone. To install, fit the hooks into the notches on the front of the phone and press down firmly until it snaps into place.
Making and Answering Calls Making Calls Placing a call from your Sprint PCS Phone is as easy as making a call from any land line phone. Just enter the number and press , and you’re on your way to clear calls. To make a call using your keypad: 1. Make sure your phone is on. 2. Enter a phone number from standby mode. (If you make a mistake while dialing, press to erase one digit at a time. Press and hold to erase the entire number.) 3. Press .
Dialing Options Dialing options are displayed when you press Options (right softkey) after entering numbers in the phone’s standby mode. To select an option, highlight it and press . Abbrev. Dial to dial the phone number in your Contacts list that ends with the digits you entered. (See “Using Abbreviated Dialing”on page 42.) Call to dial the phone number. Call:Speaker On to dial the phone number in speakerphone mode.
Answering Calls To answer an incoming call: 1. Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.) 2. Press or to answer an incoming call. (Depending on your phone’s settings, you may also answer incoming calls by opening the phone or by pressing any number key.) To answer an incoming call with the flip closed: 1. Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.) 2.
When receiving a call, the following options are also displayed by pressing Options (right softkey). To select an option, highlight it and press . Call Guard to answer the call when you are in roaming mode. (See “Using Call Guard”on page 105.) Answer to answer the call. Answer:Speaker to answer the call in speakerphone mode. Answer on Hold to put the call on hold. (See “Setting Answer on Hold”on page 30.) Screen Call to answer the call by using a pre-recorded announcement.
Setting Answer on Hold This feature allows you to hold an incoming call when you cannot answer immediately. To set Answer on Hold: 1. When you receive an incoming call, press Options (right softkey). 2. Highlight Answer on Hold and press . (The caller hears will display on the a message to wait your answer. screen while the call is on hold.) To resume the call: Press Answer (left softkey) or . – or – Press Options (right softkey), highlight Answer or Answer:Speaker and press .
Using the Speakerphone To turn the speakerphone on during a call: Press . – or – Phone Basics The speakerphone feature lets you hear audio through the speaker and talk without holding the phone. When the speakerphone is activated, use the volume control keys on the side of the phone to adjust the volume. Press Options (right softkey), highlight Speaker On, and press . To turn the speakerphone off during a call: Press . – or – Press Options (right softkey), highlight Speaker Off, and press .
Changing the Ringer Volume To change the ringer volume, press the Side Volume key when the phone is open and in standby mode. Note: To change the ringer volume from the main menu, see “Adjusting the Phone’s Volume Settings”on page 55. Adjusting Volume During a Conversation When you need to adjust the receiver volume during a conversation, use the side volume key, or press the navigation key up or down while a call is in progress.
Missed Call Notification When an incoming call is not answered, the Missed Call log and the icon are displayed on your screen. To call the Missed Call entry: Press or . Tip: If you have two or more notifications, the Missed Alerts list will appear. To clear the Missed Call display: Phone Basics Press Dismiss (right softkey). Tip: To check the missed notification from standby mode, press and select Missed Alerts.
Calling Emergency Numbers You can place calls to 911 (dial and press ), even if your phone is locked or your account is restricted. When you place an emergency call, your phone automatically enters Emergency mode. WXYZ Press Options (right softkey) to display the options. To select an option, highlight it and press . Speaker On to activate speakerphone mode. (If you are in speakerphone mode, the option will appear as Speaker Off to deactivate.
To select Emergency mode options: 1. Press during a 911 call. 2. Press Options (right softkey). Call 911 to call 911. Call 911:Speaker to call 911 in speakerphone mode. Exit Emergency to exit Emergency mode. 3. Highlight an option and press . In-Call Options Phone Basics Pressing Options (right softkey) during a call displays a list of features you may use during the course of a call. To select an option, highlight it and press .
Messaging to access the Messaging menu. (See “Sprint PCS Messaging”on page 275.) Tools to access the Tools menu. (See “Using the Phone’s Calendar and Tools”on page 137.) Settings to access the Settings menu. (See “Controlling Your Phone’s Settings”on page 49.) Note: The Flash menu appears only for Call Waiting and Three-Way Calling.The Three-Way Call menu does not appear in Roaming areas.
Saving a Phone Number To save a number from standby mode: 1. Enter a phone number. Phone Basics Your Sprint PCS Phone can store up to 700 phone numbers in up to 500 Contacts entries (an entry may contain up to seven numbers). Each entry’s name can contain 16 characters. Your phone automatically sorts the Contacts entries alphabetically. (For more information, see Section 2G: Using the Contacts Directory on page 123.) 2. Press Options (right softkey). 3. Highlight Save Phone# and press 4.
Finding a Phone Number You can search Contacts list entries for phone numbers that contain a specific string of numbers. To find a phone number: 1. Enter the last four or more digits of the number and press Options (right softkey). (The more numbers you enter, the more specific the search becomes.) 2. Highlight Find and press . (The Contacts entry that ends with the digits you entered appears.) 3. Scroll to your desired entry. Press Press to display the entry details. or to dial.
To dial or save phone numbers with pauses: 1. Enter the phone number and press Options (right softkey). 2. Highlight either Hard Pause or 2-Sec. Pause and 3. Enter additional numbers (for example, a passcode or an extension). 4. To dial the number, press or . (When dialing a number with a hard pause, press to send the next set of numbers.) – or – To save the number in your Contacts list, press Options (right softkey), highlight Save Phone#, and press .
Tip: Plus Code Dialing cannot be used when entering an address for messaging. (See “Using Text SMS Messaging”on page 256 to send a Text SMS message. See “Sending Sprint PCS Picture Mail”on page 200 to send a picture or video.) Dialing From the Contacts Directory To dial directly from a Contacts entry: 1. Press to access the main menu. 2. Select Contacts. 3. Select Find/Add Entry ( ). Shortcut: From standby mode, press Contacts (right softkey) to list entries. 4.
Using Speed Dialing With this feature, you can dial your favorite entries using one key press for locations 2-9. (See “Assigning Speed Dial Numbers”on page 132.) From standby mode, press and hold the appropriate key for approximately two seconds. – or – Phone Basics To use speed dial for voice calls: From standby mode, press the appropriate key and press or . The display confirms that the number has been dialed when it shows “Connecting...”.
Using Abbreviated Dialing Abbreviated Dialing is another form of speed dialing. It allows you to dial a number by entering the last 3-6 digits of any number in your Contacts directory. This feature becomes available when you enable Abbreviated Dialing and enter the appropriate digits of a phone number. (See “Setting Abbreviated Dialing”on page 84.) To place a call using Abbreviated Dialing: 1. Dial the last 3-6 digits of a contact’s phone number. 2.
Entering Text Selecting a Character Input Mode To change the character input mode: 1. When you display a screen where you can enter text, Phone Basics Your Sprint PCS Phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when using Sprint PCS Mail and Text SMS Messaging). press Mode (right softkey). 2.
Select Language to select the language (English or Spanish). Erase All to erase all text (if applicable). Paste to paste copied or cut text (if applicable). SelectText to select stored text for copying or cutting. Tip: When entering text, press the Shift key to change letter capitalization (Abc > ABC > abc). Entering Characters Using T9Text Input T9 Text Input lets you enter text in your Sprint PCS Phone by pressing keys just once per letter.
Adding a Word to the T9 Database If a word you want to enter does not display as an option when you are using T9 Text Input, you can add it to the database. 1. Select the Add Word mode. (See “Selecting a Character Input Mode”on page 43.) 2. Enter the word using multi-tap (Alphabet) text entry and press Save (left softkey). Phone Basics To add a word to the T9 Text Input database: – or – 1. Press to access the main menu. 2. Select Settings. 3. Select Others ( WXYZ ). 4. Select Text Entry. 5.
Customizing the T9 Settings To customize the T9 Settings: 1. Press to access the main menu. 2. Select Settings. 3. Select Others ( WXYZ ). 4. Select Text Entry. 5. Select T9 Settings. 6. Select your desired option and press . Predict.Txt Mode to allow T9 text input to recognize words you have added to the T9 database. Word Choice List to display word choice list. Show aft enter to select when (after 1-3 digits) to display the words choice list.
Entering Characters by Tapping the Keypad To enter characters by tapping the keypad: 1. Select the Alphabet mode. (See “Selecting a Character Input Mode”on page 43.) letter appears (for example, to enter the word “Bill,” press twice, three times, three times, and three times again). (If you make a mistake, press to erase a single character. Press and hold to delete word by word.) GHI ABC JKL JKL Phone Basics 2.
In Spanish mode, characters scroll in the following order: Key ABC DEF GHI JKL MNO PQRS TUV WXYZ Space Shift Spanish Sequence Lower Case Upper Case .,@1¿?¡! #/ aábc2 AÁBC2 deéf3 DEÉF3 ghií4 GHIÍ4 jkl5 JKL5 mnñoó6 MNÑOÓ6 pqrs7 PQRS7 tuúüv8 TUÚÜV8 wxyz9 WXYZ9 0 Space One-character- shifted Caps Lock Unshifted * To select Spanish mode for text entry, select Mode > Select Language > Spanish. (See “Selecting a Character Input Mode”on page 43.
Section 2B Controlling Your Phone’s Settings In This Section Your Phone’s Settings Sound Settings Display Settings Location Settings Messaging Settings Airplane Mode TTY Use With Sprint PCS Service Phone Setup Options Customizing the User Interface Using the menu options available on your Sprint PCS Phone, you can customize your phone to sound, look, and operate just the way you want it to.This section describes how you can change your phone’s settings to best suit your needs.
Sound Settings Ringer Types Ringer types help you identify incoming calls and messages. You can assign ringer types to individual Contacts entries, types of calls, and types of messages. Preprogrammed Ringers include a variety of standard ringer types and familiar music. Vibrating Ringer alerts you to calls or messages without disturbing others. Downloaded Ringers can be downloaded right to your phone. (See “Downloading Premium Services Content”on page 280.
To select a distinctive ringer for voice calls while roaming: 1. Press to access the main menu. 2. Select Settings. 3. Select Sounds ( ). 4. Select Ringer Type ( ABC ). 5. Select Voice Calls. Your Phone’s Settings 6. Select Roaming. 7. Select Distinctive. (Select Normal to deactivate this feature.) Selecting Ringer Types for Sprint PCS Ready Link Calls To select a ringer type for Sprint PCS Ready Link calls: 1. Press to access the main menu. 2. Select Settings. 3. Select Sounds ( ). 4.
Selecting Ringer Types for Voicemail or Calendar/Alarm To select a ringer type for voicemail or calendar/alarm: 1. Press to access the main menu. 2. Select Settings. 3. Select Sounds ( ). 4. Select Ringer Type ( ABC ). 5. Select Voicemail or Calendar/Alarm. 6. Press press , scroll to your desired ringer type, and . Selecting Ringer Types for Messaging To select a ringer type for messaging: 1. Press to access the main menu. 2. Select Settings. 3. Select Sounds ( ). 4.
Selecting a Tone Length Your phone offers a number of options for selecting the audible tones accompanying a key press. (Longer tone lengths may be better for tone recognition when dialing voicemail or other automated systems.) To select a tone length: 1. Press to access the main menu. Your Phone’s Settings 2. Select Settings. 3. Select Sounds ( 4. Select Others ( ). PQRS ). 5. Select Tone Length. 6. Select Short or Long. Setting a Start-up/Power-off Tone To set a start-up/power-off tone: 1.
Using Voice Prompt This feature allows you to hear voice prompts at Automatic Speech Recognition (ASR), Voice Memo, Screen Call setting, etc. (default setting is off). To enable or disable voice prompt: 1. Press to access the main menu. 2. Select Settings. 3. Select Sounds ( 4. Select Others ( ). PQRS ). 5. Select Voice Prompt. 6. Select On or Off. Tip: When ringer volume is set to “Silence All,”voice prompts cannot be heard.
Adjusting the Phone’s Volume Settings You can adjust your phone’s volume settings to suit your needs and your environment. To adjust the ringer and key volume: 1. Press to access the main menu. 2. Select Settings. Your Phone’s Settings 3. Select Sounds ( ). 4. Select Ringer/Key Vol. ( ). 5. Select Ringer Volume, Calendar/Alarm, Start-up/Pw-off, or Key Beep. 6. Using the navigation key, choose a volume level and press . To adjust the earpiece or speaker volume: 1. Press to access the main menu.
To adjust the application volume: This option allows you to select a volume level for video, Sprint TV, downloaded data, and browser. 1. Press to access the main menu. 2. Select Settings. 3. Select Sounds ( ). 4. Select Application Vol. ( 5. Press MNO ). , choose a volume level, and press . Selecting Vibrate Types With this feature, you can select vibrate types for incoming calls, messages, and schedule alarms. To select vibrate types: 1. Press to access the main menu. 2. Select Settings. 3.
Alert Notification Your Sprint PCS Phone can alert you with an audible tone when you change service areas, once a minute during a voice call, or incoming or missed Sprint PCS Ready Link calls. To set alerts: 1. Press to access the main menu. 3. Select Sounds ( 4. Select Alerts ( GHI Your Phone’s Settings 2. Select Settings. ). ). 5. Select your desired option and press . Service sets an alert to notify you of network services parameter changes.
6. Use your navigation key to select a setting and press . Tip: You can select Once or Repeat Alert if you select Ready Link Calls, R-Link Missed, Voicemail, or Messaging. Repeat Alert sounds an alert every two minutes for twenty minutes. (For Ready Link Calls, it sounds for 20 seconds continuously.) Silence All There may be times when you need to silence your phone entirely. The phone’s Silence All option allows you to mute all sounds without turning your phone off. To activate Silence All: 1.
Display Settings Changing the Text Greeting The text greeting can be up to fifteen characters and is displayed on your phone’s screen in standby mode. You may choose to keep the phone’s default greeting (“Sprint”), or you may enter your own custom greeting. Your Phone’s Settings To display or change your custom greeting: 1. Press to access the main menu. 2. Select Settings. 3. Select Display ( ABC ). 4. Select Greeting. 5. Select Custom ( ABC ). 6.
Changing the BacklightTime Length The backlight setting lets you select how long the display screen and keypad are backlit after any key press is made. To change the Main LCD or Sub LCD backlight setting: 1. Press to access the main menu. 2. Select Settings. 3. Select Display ( ABC ). 4. Select Backlight. 5. Select Main LCD or Sub LCD. 6. Select Always On, Always Off, or your defined time length. Note: The Always On setting returns to the previous value the next time you turn on the phone.
Changing the Display Screen Animation Your new Sprint PCS Phone offers options for what you see on the display screen during various phone functions. To change the animation display: 1. Press to access the main menu. 2. Select Settings. ABC ). Your Phone’s Settings 3. Select Display ( 4. Select Animation. 5. Select Standby, Outgoing Calls, or Service Search. 6. Select your desired option (Preset, My Content, Get New, My Albums, Assign. Media, or Off) and press .
Changing the Display for Area Name This feature enables you to show the area of the phone number you are calling or are called from when the number is not registered in your Contacts list. For example, a call to or from 213-555-5555 will display “California.” To set your area name display: 1. Press to access the main menu. 2. Select Settings. 3. Select Display ( ABC ). 4. Select Others. 5. Select Match Area Code. 6. Select On or Off.
Changing the Clock/Calendar Display for Standby Mode This feature enables you to select a variety of items to display in standby mode. To set the clock/calendar display for standby mode: 1. Press to access the main menu. 3. Select Display ( ABC Your Phone’s Settings 2. Select Settings. ). 4. Select Clock/Calendar. 5. Select Main LCD or Sub LCD. 6. Select your desired item and press . Digital Clock 1-3 displays the local time in digital view.
Changing the Screen Saver Your new Sprint PCS Phone offers you the option of displaying a screen saver while in standby mode. To change the screen saver: 1. Press to access the main menu. 2. Select Settings. 3. Select Display ( ABC ). 4. Select Screen Saver. 5. Select Main LCD or Sub LCD. 6. Select your desired option (Preset, My Content, Get New, PC Sync, My Albums, Assign. Media, or Off) and press . 7. Select the desired screen saver and press OK (left softkey).
Changing the Background You can customize your phone display’s appearance by selecting a color scheme to reflect your personality. To change the display’s background: 1. Press to access the main menu. 2. Select Settings. ABC Your Phone’s Settings 3. Select Display ( ). 4. Select Background. 5. Select Main LCD or Sub LCD. 6. Select your desired background. Changing the Font Size You can change the font size settings for the message and browser. To change the font size: 1.
Setting Return to Standby Mode This feature allows you to select the way to return to standby mode. To set this feature: 1. Press to access the main menu. 2. Select Settings. 3. Select Display ( ABC ). 4. Select Others. 5. Select Return to Idle. 6. A message appears. Press OK (left softkey) to continue. 7. Select Automatically or End Key. Automatically to return to standby mode automatically in 30 seconds. End Key to return to standby mode by pressing .
Location Settings Your Sprint PCS Phone is equipped with a Location feature for use in connection with location-based services that may be available in the future. Your Phone’s Settings The Location feature allows the network to detect your position. Turning Location off will hide your location from everyone except 911. Note: Even if the Location feature is enabled, no service may use your location without your express permission, unless the service called cannot identify the caller.
Messaging Settings Staying connected to your friends and family has never been easier. With your phone’s advanced messaging capabilities, you can send and receive many different kinds of text messages and Voice SMS messages without placing a voice call. (For more information, see “Using Text SMS Messaging” on page 256, “Using Voice SMS Messaging”on page 260, and “Accessing Messaging”on page 275.
Managing Preset Messages Your phone is pre-set with twenty canned messages each in English and Spanish to help make sending text messages faster and easier. These messages, such as “Where are you?,” “Let’s get lunch.,”and “Meet me at,”can be customized or deleted to suit your needs. You can even add your own preset messages to the list. 1. Press Your Phone’s Settings To edit a preset message: to access the main menu. 2. Select Settings. 3. Select Messaging ( PQRS 4. Select Preset Msgs ( ABC ). ).
Setting a Callback Number With this feature, you can notify your recipients of your callback number with the text message. To set the callback number: 1. Press to access the main menu. 2. Select Settings. 3. Select Messaging ( 4. Select Text ( DEF PQRS ). ). 5. Select Send Callback# ( 6. Press ). , select an option from the following. None to send no callback number. My Phone# to send your phone number. Other to send a specific callback number.
6. Press and select On. 7. Select Text. 8. Enter your signature and press OK (left softkey). 9. Press Save (left softkey) to save your signature. Note: You can insert your signature even when your signature setting is Your Phone’s Settings off. Press Mode (right softkey) and select Signature while composing your message. Setting Drafts Alert Drafts Alert sends you a reminder when you have unsent messages waiting in the drafts folder. To set Drafts Alert: 1. Press to access the main menu. 2.
Setting the Speakerphone for Voice SMS Messaging You can set the speakerphone on or off for Voice SMS messaging. By default, the speakerphone is set to on. To set the speakerphone on or off: 1. Press to access the main menu. 2. Select Settings. 3. Select Messaging ( PQRS 4. Select Voice SMS ( GHI ). ). 5. Select Speakerphone ( ). 6. Select On or Off. Setting the Sender’s Name for Voice SMS Messaging With this feature, you can identify yourself to people who receive your Voice SMS message.
Setting an Alert Notification for Voice SMS Messaging Voice SMS Messaging uses your phone’s data services. You can set your phone to play an audible alert to let you know you are connecting to data services each time you access a Voice SMS message. To set alerts for Voice SMS messaging: Your Phone’s Settings 1. Press to access the main menu. 2. Select Settings. 3. Select Messaging ( PQRS 4. Select Voice SMS ( GHI 5. Select Connect. Alert ( ). ). DEF ). 6.
Airplane Mode Airplane Mode allows you to use many of your phone’s features, such as Games, Voice Memo, etc., when you are in an airplane or in any other area where making or receiving calls or data is prohibited. When your phone is in Airplane Mode, it cannot send or receive any calls or access online information. To set your phone to Airplane Mode: 1. Press to access the main menu. 2. Select Settings. 3. Select Others ( WXYZ ). 4. Select Airplane Mode. (The Airplane Mode disclaimer displays.) 5.
TTY UseWith Sprint PCS Service A TTY (also known as a TDD or TextTelephone) is a telecommunications device that allows people who are deaf, hard of hearing, or who have speech or language disabilities, to communicate by telephone. Your Phone’s Settings Your phone is compatible with select TTY devices. Please check with the manufacturer of your TTY device to ensure that it supports digital wireless transmission.
To turn TTY Mode on or off: 1. Press to access the main menu. 2. Select Settings. 3. Select Others ( WXYZ ). 4. Select TTY. (You will see a message on the display.) 5. Press OK (left softkey) to continue. 6. Select Enable or Disable. Note: In TTY Mode, your phone will display the icon. Note: If TTY mode is enabled, the audio quality of non-TTY devices connected to the headset jack may be impaired.
Phone Setup Options My Favorites Your phone offers you the option of assigning a shortcut key to a favorite or often-used function. Pressing Favorites (left softkey) in standby mode will launch your personally designated shortcut. Your Phone’s Settings To assign your shortcut key: 1. Press Favorites (left softkey) to display the My Favorites list. 2. Highlight and press . 3. Select one of the following options. Contact to display the stored Contacts entry.
To edit the shortcut: 1. Press Favorites (left softkey) to display the My Favorites list. 2. Select your desired shortcut and press Options (right softkey). 3. Highlight your desired option and press . Replace to replace the link in the current assigned number. Remove to delete the currently highlighted shortcut in the My Favorites list. Remove All to delete all the shortcuts in the My Favorites list. Help to see the My Favorites instruction page.
Changing the Phone’s Menu Style Your Sprint PCS Phone allows you to choose how the main menu appears on your display screen. To change the main menu style: 1. Press to access the main menu. 2. Press Options (right softkey), highlight Change View, and . 3. Select either Grid View or ListView and press Your Phone’s Settings press . Changing the Main LCD Background You can change the Main LCD background color from the main menu. To change the Main LCD display’s background: 1.
Auto Answer Mode You may set your phone to automatically pick up incoming calls in speakerphone mode or when connected to an optional hands-free car kit and headset. To set Auto Answer mode: 1. Press to access the main menu. 2. Select Settings. 3. Select Others ( WXYZ ). 4. Select Auto Answer. 5. Select Car Kit/Headset or Speakerphone. 6. Select 5 Seconds, 15 Seconds, or Off. Display Language You can choose to display your Sprint PCS Phone’s onscreen menus in English or in Spanish.
Setting the Open/Close Flip Option This feature enables you to answer an incoming call by opening the flip or to end a call by closing the flip. To activate the Open Flip feature: 1. Press to access the main menu. 2. Select Settings. WXYZ Your Phone’s Settings 3. Select Others ( ). 4. Select Open/Close Flip. 5. Select Open. 6. Select Answer Call. To deactivate this feature, select No Action during step 6 above. To activate the Close Flip feature: 1. From step 5 above, select Close.
Setting Any Key Answer This feature allows you to answer incoming calls by pressing any key (except , , softkeys, and sidekeys). To turn Any Key Answer on or off: 1. Press to access the main menu. 2. Select Settings. 3. Select Others ( WXYZ ). 4. Select Any Key Answer. 5. Select On or Off. Setting the Side Key Guard This feature enables you to lock your side keys while the flip is closed. To turn Side Key Guard on or off: 1. Press to access the main menu. 2. Select Settings. 3.
Setting Text Entry Options To set your text entry options: 1. Press to access the main menu. 2. Select Settings. 3. Select Others ( WXYZ ). 4. Select Text Entry. . Auto-Capital to set the auto-capital on or off. My Words to set your original words (see page 45). Input Language to select the language (English or Spanish). Auto-Space to set the auto-space on or off after T9 words you enter. T9 Settingsto customize the T9 settings (see page 46).
Setting Abbreviated Dialing Abbreviated Dialing is another form of speed dialing. It allows you to dial a number by entering 3-6 digits of any number in your Contacts Directory. If the digits you enter do not match any stored Contacts entry, your phone will automatically prepend the digits you specify. To activate this feature: 1. Press to access the main menu. 2. Select Settings. 3. Select Others ( WXYZ ). 4. Select Abbrev. Dial. 5. Select Ph. Book Match. 6. Select Enable.
8. Enter a five- or six-digit number (for example, an area code and prefix) and press OK (left softkey). To deactivate this feature, highlight Disable during step 6 on page 84. Tip: To dial the prepend number, see “Using Abbreviated Dialing”on page 42. Your Phone’s Settings Note: This setting does not apply to 911 or Directory Assistance. Headset Mode This feature allows you hands-free phone use.
6. Select an option from the following. Voice Calls: Press the Turbo Button to activate ASR (Automatic Speech Recognition). Press twice to redial the last call. Press and hold the button to record a voice memo. Ready Link: Press the Turbo Button to make a Sprint PCS Ready Link call by using ASR (Automatic Speech Recognition). Press twice to redial the last Sprint PCS Ready Link call. Off:Turns this feature off. To set the sound mode: 1. Press to access the main menu. 2. Select Settings. 3.
Customizing the User Interface Your Sprint Power Vision Phone lets you customize the user interface (UI) of the Standby Screen, Main Menu and My Favorites settings with your choice of downloaded Themes to reflect your personality. You can download the latest themes directly into your phone from the corresponding URL. Your Phone’s Settings Downloading Themes To download an available theme to your phone: 1. Press to access the main menu. 2. Select My Content. 3. Select Themes and press . 4.
Changing the Display Themes You can change your phone’s display appearance by selecting the downloaded themes. To change the display themes: 1. Press to access the main menu. 2. Select Settings. 3. Select Display ( ABC ). 4. Select Themes. 5. Select Classic View or available downloaded themes and press . Classic View displays the preset standard clock display selected in the Calendar/Clock menu (see page 63).
Section 2C Setting Your Phone’s Security In This Section Accessing the Security Menu Using Your Phone’s Lock Feature Your Phone’s Security Restricting Calls Using Special Numbers Erasing Phone Content Resetting Your Picture Mail Account Resetting Your Phone Resetting and Locking Your Phone Through SMS Security Features for Sprint PCS Vision SM By using the security settings on your Sprint PCS Phone, you receive peace of mind without sacrificing flexibility.
Accessing the Security Menu All of your phone’s security settings are available through the Security menu. You must enter your lock code to view the Security menu. To access the Security menu: 1. Press to access the main menu. 2. Select Settings. 3. Select Security ( TUV ). 4. Enter your lock code to display the Security menu. Tip: If you can’t recall your lock code, try using the last four digits of either your Social Security number or Sprint PCS Phone number or try 0000 or NATL (6285).
Unlocking Your Phone To unlock your phone: 1. From standby mode, press Unlock (left softkey). 2. Enter your lock code. Locking the Pictures Menu With this feature, you must enter your lock code when you access the pictures menu. To lock the pictures menu: ABC ). Your Phone’s Security 1. From the Security Menu, select Lock Pictures ( 2. Select Lock Now. (Select Unlocked to deactivate this feature.
Changing the Lock Code To change your lock code: 1. From the Security Menu, select Others ( 2. Select Change Lock ( TUV ). ). 3. Enter a new lock code (“1234”for example). 4. Reenter the new code. Calling in Lock Mode You can place calls to 911, Sprint Customer Service, and to your special numbers when in lock mode. (For information on special numbers, see “Using Special Numbers”on page 94.
Restricting Calls There may be occasions when you want to limit the numbers your phone can call or from which it can receive calls. You can use the Restrict Calls setting to do just that. (The Restrict Calls setting does not apply to 911 or Sprint Customer Service.) To restrict calls: 1. From the Security Menu, select Others ( 2. Select Limit Use ( ABC TUV ). ). 3. Select Outgoing Calls or Incoming Calls. Your Phone’s Security 4. Select your desired option and press .
Using Special Numbers Special numbers are important numbers that you have designated as being “always available.” You can receive calls from special numbers even if your phone is locked. You can save three special numbers in addition to your Contacts entries (the same number may be in both directories). To add or replace a special number: 1. From the Security Menu, select Others ( 2. Select Special #s ( DEF TUV ). ). 3. Select an entry number. 4. Enter your desired phone number and press .
Erasing Phone Content The security menu lets you quickly and easily erase various categories of data from your phone’s memory. Erasing the Contacts Directory To erase all the names and phone numbers in your Contacts Directory: 1. From the Security Menu, select Erase Ph. Book ( DEF ). 2. Press OK (left softkey) to continue. Your Phone’s Security 3. If you are certain you would like to erase all of your Contacts entries, select Yes. Erasing All Voice Tags To erase all voice tags you have recorded: 1.
Erasing All Downloads You can use your phone’s security menu to erase all items you have downloaded to your phone. To erase all downloads: 1. From the Security Menu, select Erase Content ( JKL ). 2. Press OK (left softkey) to continue. 3. If you are certain that you would like to erase all items downloaded to your phone, select Yes. If you have assigned downloaded data, the function returns to its default setting. Note: The items with the icon will not be deleted.
Resetting Your Picture Mail Account This option resets your authentication ID for your Sprint PCS Picture Mail account. To reset your Picture Mail account: 1. From the Security Menu, select Reset Pict. Mail ( MNO ). 2. Press OK (left softkey) to continue. 3. If you are certain that you would like to reset your Picture Mail account, select Yes. Your Phone’s Security Resetting Your Phone Resetting the phone restores all the factory defaults, including the ringer types and display settings.
Resetting and Locking Your Phone Through SMS When your phone is lost or stolen, you can erase your important personal information (such as Contacts entries, call history, and messages) and lock your phone by sending a special formatted SMS message to your phone. From your computer, sign on to www.sprint.com and send a message to your phone (input your 10-digit Sprint PCS Phone Number) in the following format: \ \ RESET **** RESET – your defined passcode.
To activate this feature, the following presetting is required: 1. Press to access the main menu. 2. Select Settings. 3. Select Security ( ). TUV 4. Enter your lock code. 5. Select Others ( ). TUV 6. Select Found Me ( ). GHI 7. Select Reset/Lock ( ). Your Phone’s Security 8. Select Enable. To unlock a phone that has been locked through SMS, bring the phone to a Sprint Store. Changing the Passcode To change the passcode for the special formatted SMS messages: 1.
SM Security Features for Sprint PCS Vision Enabling and Disabling Sprint PCS Vision Services You can disable Sprint PCS Vision services without turning off your phone; however, you will not have access to all Sprint PCS Vision services, including Web and Sprint PCS Mail. Disabling Sprint PCS Vision will avoid any charges associated with Sprint PCS Vision services. While signed out, you can still place or receive phone calls, check voicemail, and use other voice services.
Section 2D Controlling Your Roaming Experience In This Section Understanding Roaming Setting Your Phone’s Roam Mode Using Call Guard Roaming Roaming is the ability to make or receive calls when you’re off the Nationwide Sprint PCS Network.Your new Sprint Power Vision Multimedia Phone MM-7500 by Sanyo works anywhere on the Nationwide Sprint PCS Network and allows you to roam on 1900 and 800 MHz digital networks where we’ve implemented roaming agreements with other carriers.
Understanding Roaming Recognizing the Roaming Icon on the Display Screen Your phone’s display screen always lets you know when you’re off the Nationwide Sprint PCS Network. Any time you are roaming, the phone displays the roaming icon ( ). Tip: Remember, when you are using your phone off the Nationwide Sprint PCS Network, always dial numbers using 11 digits (1 + area code + number).
Checking for Voicemail Messages While Roaming When you are roaming off the Nationwide Sprint PCS Network, you may not receive on-phone notification of new voicemail messages. Callers can still leave messages, but you will need to periodically check your voicemail for new messages if you are in a roaming service area for an extended period of time. To check your voicemail while roaming: 1. Dial 1+area code+your Sprint PCS Phone number. 2. When you hear your voicemail greeting, press Shift . 3.
Setting Your Phone’s Roam Mode Your Sprint PCS Phone allows you to control your roaming capabilities. By using the Roaming menu option, you can determine which signals your phone accepts. Set Mode Choose from three different settings on your multimedia phone to control your roaming experience. To set your phone’s roam mode: 1. Press to access the main menu. 2. Select Settings. 3. Select Roaming ( MNO ). 4. Select Set Mode. 5. Select an option from the following.
Using Call Guard Your phone has two ways of alerting you when you are roaming off the Nationwide Sprint PCS Network: the onscreen roaming icon and Call Guard. Call Guard makes it easy to manage your roaming charges by requiring an extra step before you can place or answer a roaming call. (This additional step is not required while on the Nationwide Sprint PCS Network.) To turn Call Guard on or off: 1. Press to access the main menu. 2. Select Settings. 3. Select Roaming ( MNO ). 4. Select Call Guard.
To answer incoming roaming calls with Call Guard on: Press Options (right softkey), highlight Answer or Answer:Speaker, and press . – or – 1. Press or 2. Press to proceed while the pop-up message is . displayed. Reminder: If the Call Guard feature is set to On, you need to take extra steps to make and receive roaming calls.
Section 2E Navigating Through Menus In This Section Menu Navigation Menu Structure Viewing the Menus Every function and feature of your Sprint PCS Phone can be accessed through an onscreen menu.This section is a road map to using your MM-7500 by Sanyo. Please take a few moments to learn your way around and you’ll find your phone easier to use.
Menu Navigation The navigation key on your Sprint PCS Phone allows you to scroll through menus quickly and easily. The scroll bar at the right of the menu keeps track of your position in the menu at all times. To navigate through a menu, simply press the navigation key up or down. Menu Structure Selecting Menu Items As you navigate through the menu, menu options are highlighted. Select any numbered option by simply pressing the corresponding number on the phone’s keypad.
Backing Up Within a Menu To go to the previous menu: Press . To return to standby mode: Press . Shortcuts Use your navigation key to quickly access your phone’s menus. Right to take a shortcut to the On Demand menu. Left to take a shortcut to the SprintTV menu. Up to take a shortcut to the Messaging menu. Down to take a shortcut to the My Content menu.
Viewing the Menus Menu Diagram The following outlines your phone’s list menu structure. (See page 79 for setting the main menu style.) 1. Missed Alerts 2. Call History 1. 2. 3. 4. 5. Outgoing Incoming Missed Recent Calls Erase History 3. Contacts 1. 2. 3. 4. Find/Add Entry Speed Dial #s My Phone# Services 4. Messaging 1. 2. 3. 4. 5. 6. 7. 8. Send Message Text Picture Mail Premium Msg Voice SMS IM & Email Chat & Dating Voicemail 5. On Demand 6. Pictures 1. 2. 3. 4. 5. 6. 7.
7. My Content 1. 2. 3. 4. 5. 6. 7. 8. 9. Games Themes Ringers Screen Savers Applications IM & Email Call Tones Dynamic 1-11 (If applicable) Others (If applicable) 8. Music 9. Sprint TV 0. Web *. Tools Section 2E: Navigating Through Menus Menus 1. Voice Services 1. Voice Memo 2. Screen Call 2. Calendar 3. Alarm Clock 4. Countdown 5. Stop Watch 6. World Clock 7. Calculator 8. Update Phone 9. PictBridge 0. Assign. Media *. PC Sync 1. Ringers 2. Images 3.
#. Settings 1. Sounds 1. Ringer/Key Vol. 2. Ringer Type 3. Vibrate Type 4. Alerts 5. Receiver Vol. 6. Application Vol. 7. Others 2. Display 1. Backlight 2. Greeting 3. Background 4. Animation 5. Incoming Calls 6. Themes 7. Screen Saver 8. Clock/Calendar 9. Others 3. Power Vision 1. Enable (or Disable) Vision 2. Net Guard 3. Update Profile 4. Ready Link 1. Enable/Disable 2. List Update 3. Sounds 4. Speakerphone 5. Default View 6. Floor Display 7. R-Link Guard 8. Restart 9. Help 5.
Section 2E: Navigating Through Menus Menus 6. Roaming 1. Set Mode 2. Call Guard 7. Messaging 1. Notification 2. Preset Msgs 3. Text 4. Voice SMS 8. Security 1. Lock Phone 2. Lock Pictures 3. Erase Ph. Book 4. Erase Voice Tag 5. Erase Content 6. Reset Pict. Mail 7. Reset Phone 8. Others 9. Others 1. Airplane Mode 2. Text Entry 3. Any Key Answer 4. Auto Answer 5. Open/Close Flip 6. Abbrev. Dial 7. Power On to Alert 8. Headset Mode 9. TTY 10.Side Key Guard 11.Language 0. Phone Info 1. Phone#/User ID 2.
114
Section 2F Managing Call History In This Section Viewing History Call History Options Making a Call From Call History Saving a Phone Number From Call History Prepending a Phone Number From Call History Erasing Call History The Call History keeps track of incoming calls, calls made from your Sprint PCS Phone, and missed calls.This section guides you through accessing and making the most of your Call History.
Viewing History You’ll find the Call History feature very helpful. It is a list of the last 20 voice calls and Ready Link calls for calls you placed, accepted, or missed. Call History makes redialing a number fast and easy. It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed from the bottom of the list. Each entry contains the phone number (if it is available) and Contact’s name (if the phone number is in your Contacts list).
Call History Options For additional information and options on a particular call, highlight a Call History entry and press . This feature displays the date and time of the call, the phone number (if available), and the caller’s name (if the number is already in your Contacts list). By pressing Options (right softkey), you can select from the following options: Call to dial the phone number. Call:Speaker On to dial the phone number in speakerphone mode.
Making a Call From Call History To place a call from Call History: 1. Press to access the main menu. 2. Select Call History. 3. Select Outgoing ( or Recent Calls ( GHI ), Incoming ( ABC ), Missed ( DEF ), ). 4. Scroll to the entry you want to call. 5. Press or . – or – Press Options (right softkey), highlight Call or Call:Speaker On, and press . Note: You cannot make calls from Call History to entries identified as No ID or Restricted.
Saving a Phone Number FromCall History Your Sprint PCS Phone can store up to 700 phone numbers in up to 500 Contacts entries (an entry may contain up to seven numbers). Each entry’s name can contain sixteen characters. To save a phone number from Call History: 1. Press to access the main menu. 2. Select Call History. 3. Select Outgoing ( or Recent Calls ( GHI ), Incoming ( ABC ), Missed ( DEF ), ). 4. Scroll to a call history entry and press Options (right softkey). 5.
Prepending a Phone Number From Call History If you need to place a call from Call History and you happen to be outside your local area code, you can add the appropriate prefix by prepending the number. To prepend a phone number from Call History: 1. Press to access the main menu. 2. Select Call History. 3. Select Outgoing ( or Recent Calls ( GHI ), Incoming ( ABC ), Missed ( DEF ), ). 4. Scroll to a call history entry and press Options (right softkey). 5. Highlight Prepend and press . 6.
Erasing Call History To erase individual Call History entries, see “Call History Options”on page 117. To erase Call History: 1. Press to access the main menu. 2. Select Call History. 3. Select Erase History ( 4. Select Outgoing ( Recent Calls ( GHI JKL ). ), Incoming ( ), or All ( ). ABC ), Missed ( DEF ), JKL 5. Highlight Voice Calls or Ready Link and press . Voice Calls to erase call history for voice calls. Ready Link to erase call history for Sprint PCS Ready Link calls. 6.
122
Using the Contacts Directory In This Section Displaying the Contacts List Adding a New Contacts Entry Finding Contacts List Entries Contacts List Entry Options Adding a Phone Number to a Contacts Entry Editing a Contacts Entry Erasing a Contacts Entry From the List Assigning Speed Dial Numbers Assigning an Image to a Contacts Entry Selecting a Ringer for an Entry Secret Contacts Entries Dialing Sprint PCS Services Now that you know the basics that make it easier to stay in touch wit
Displaying the Contacts List You can change the display view for the Contacts list. You may choose to display a List view (the default setting) or you may display the list with picture ID. To display your Contacts list: From standby mode, press Contacts (right softkey). – or – 1. Press to access the main menu. 2. Select Contacts. 3. Select Find/Add Entry ( ). To change the contacts display view: 1. From standby mode, press Contacts (right softkey). 2.
Contacts Directory Adding a New Contacts Entry Your Sprint PCS Phone can store up to 700 phone numbers in up to 500 Contacts entries (an entry may contain up to seven numbers). Each entry’s name can contain sixteen characters. To add a new entry: 1. From standby mode, press Contacts (right softkey) to display the Contacts list. 2. Select . 3. Enter a name and press . 4.
Finding Contacts List Entries There are several ways to display your Contacts entries: by name, by speed dial number, by Sprint PCS Ready Link List, and by voice tags. Follow the steps outlined in the sections below to display entries from the Contacts list menu. Finding Names To find Contacts list entries by name: 1. From standby mode, press Contacts (right softkey) to display the Contacts list. 2. Scroll through all the entries using your navigation key.
Contacts Directory To find Sprint PCS Ready Link List entries: 1. From standby mode, press Contacts (right softkey) to display the Contacts list. 2. Press Go to (left softkey). Highlight your desired list and press . Phone Book to display the Contacts list. Company List to display the Company List. Company Grps. to display the Company Group List. Personal List to display the Personal List. Personal Grps. to display the Personal Group List. 3.
Finding Speed Dial Numbers To find phone numbers you have stored in speed dial locations: 1. Press to access the main menu. 2. Select Contacts. 3. Select Speed Dial #s ( ABC ). (The Speed Dial numbers list appears.) Finding Voice Tags To find Voice Tags in your phone: 1. Press . 2. You’ll hear a tone after a prompt. Say “Tools.” 3. After the prompt, say “Review Voice Tag.”(The list of Voice tags appears.
To access a contact’s options, display the Contacts list, highlight an entry and press . Then select a phone number and press Options (right softkey). To select an option, highlight it and press . Edit to edit the selected entry. Call to dial the selected number. Call:Speaker On to dial the phone number in speakerphone mode. Send Message to send a Text SMS message (page 256), a Voice SMS message (page 260), or a Picture Mail (page 200). Call Alarm to set a call alarm for the entry.
Adding a Phone Number to a Contacts Entry To add a phone number to an entry: 1. From standby mode, press Contacts (right softkey) to display the Contacts list. 2. Scroll to the entry you wish to add and press . 3. Select a phone number, press Options (right softkey), highlight Edit, and press . 4. Select the label field you want to add (Mobile, Home, Work, etc.). 5. Enter the number and press . 6. Press Save (left softkey).
Contacts Directory Editing a Contacts Entry To make changes to an entry: 1. From standby mode, press Contacts (right softkey). 2. Scroll to the entry you wish to edit and press . 3. Select a phone number, press Options (right softkey), highlight Edit, and press . – or – Select an email address or Web address and press Edit (right softkey). 4. Select the field you want to edit. 5. Edit the entry by using your keypad and press . 6. Press Save (left softkey) to save your changes.
Assigning Speed Dial Numbers With this feature you can dial Contacts Directory entries with one key press for locations 2-9. For details on how to make calls using speed dial numbers, see “Using Speed Dialing”on page 41. To assign Speed Dial: 1. Press to access the main menu. 2. Select Contacts. 3. Select Speed Dial #s ( ABC ). 4. Select an available speed dial location. 5. Select an entry from the list. 6. Select the phone number you want to set as a speed dial and press to save the setting.
Contacts Directory Assigning an Image to a Contacts Entry You can assign an image to a Contacts entry. The image is displayed when the entry calls you. To assign an image for an entry: 1. From standby mode, press Contacts (right softkey). 2. Select the entry for which you want to assign the image and press . 3. Press Options (right softkey), highlight Edit, and press . (If you are selecting an email/web address, just press Edit [right softkey].) 4. Scroll down to the box next to the icon and press 5.
Selecting a Ringer for an Entry You can assign a ringer type to a Contacts entry so you can identify the caller by the ringer type. (See “Ringer Types”on page 50.) To select a ringer type for an entry: 1. From standby mode, press Contacts (right softkey). 2. Select the entry for which you want to set the incoming ringer and press . 3. Press Options (right softkey), highlight Edit, and press . (If you are selecting an email/web address, just press Edit [right softkey].) 4.
You can hide an entry’s phone number(s) and require your lock code to edit the entry by making it secret. The entry name is still displayed, but the entry’s phone numbers are replaced with “”. To make an entry secret: 1. From standby mode, press Contacts (right softkey). 2. Scroll to the Contacts entry you want to tag as secret. 3. Press Options (right softkey) to display the menu options. 4. Highlight Set Secret and press . 5. Enter the 4-digit lock code. 6. Select On.
Dialing Sprint PCS Services Your Contacts list is preprogrammed with contact numbers for various Sprint PCS Services. To dial a service: 1. Press to access the main menu. 2. Select Contacts. 3. Select Services ( ). GHI 4. Select CustomerServ. ( ), Dir Assistance ( Account Info ( ), Sprint Operat. ( ), or Voice Command ( ). ABC ), GHI DEF JKL 5. Press or . To dial a service from standby mode using your keypad: 1.
Section 2H Calendar & Tools Using the Phone’s Calendar and Tools In This Section Using Your Phone’s Calendar Displaying Phone Information Using Your Phone’s Tools Printing Pictures Using PictBridge Your Sprint PCS Phone is equipped with several personal information management features that help you manage your busy lifestyle.This section shows you how to use these features to turn your phone into a time management planner that helps you keep up with your contacts, schedules, and commitments.
Using Your Phone’s Calendar Displaying Your Calendar To display your calendar: 1. Press to access the main menu. 2. Select Tools. 3. Select Calendar ( ABC ). Adding an Event to the Calendar Your Calendar helps organize your time and reminds you of important events (up to 100 events). To add an event: 1. From the Calendar display (see above), select the day you want to add an event and press Options (right softkey). 2. Highlight Add Event and press 3. Select Schedule ( . ). 4.
5. Select the following items. Description to enter a description of your event (up to 14 characters). From to schedule the start time. To to schedule the end time. Location to edit the location of your event (up to 14 characters). Alarm to select your desired ringer. Alarm Time to edit the alarm time (number of hours or minutes before the event starts). Default alarm time is 10 minutes before. Repeat to set the event’s repeating status. Calendar & Tools 6.
Event Alerts There are several ways your Sprint PCS Phone alerts you of scheduled events: By playing the alert tone (depending on the Ringer Type and Ringer Volume setting). By blinking the LED. By displaying the event’s description on the Main LCD or Sub LCD. By lighting the LCD backlight (depending on the backlight setting). Event Alert Menu When you have an event alarm scheduled, your phone alerts you and displays the icon and the event summary.
Adding a Call Alarm to the Calendar You can set call alarms to notify you when you need to place a call. The call alarm will let you know when and to whom to place a scheduled call. You can set up to 15 call alarms. Calendar & Tools To add a call alarm to the calendar: 1. From the Calendar display (see page 138), select the day you want to add an event and press Options (right softkey). 2. Highlight Add Event and press 3. Select Call Alarm ( ABC . ). 4.
Call Alarm Alerts There are several ways your Sprint PCS Phone alerts you of a scheduled call alarm: By playing the alert tone (depending on the Ringer Type and Ringer Volume setting). By blinking the LED. By displaying the call alarm notification on the Main LCD or Sub LCD. By lighting the LCD backlight (depending on the backlight setting). Call Alarm Menu When you have scheduled a call alarm, your phone alerts you and displays the icon and the name or phone number you wish to call.
Editing an Event or Call Alarm To edit an event or call alarm: 1. From the Calendar display (see page 138), select the . Calendar & Tools date for which you set events and press 2. Select one of the events or call alarms. (The event or call alarm details appear.) 3. Select the information you want to edit. 4. Enter or select a new setting and press . 5. Press Save (left softkey). Viewing a Future or Past Day’s Scheduled Events To view a future or past day’s scheduled events: 1.
Erasing an Event or Call Alarm To erase a scheduled event or call alarm: 1. From the Calendar display (see page 138), select the date for which you set events and press . 2. Select one of the events or call alarms and press Options (right softkey). 3. Highlight Erase Event and press . 4. Select Yes. Adding To Do List Items Your phone can store and manage up to 20 To Do List items. To add an item to your To Do List: 1. From the Calendar display (see page 138), press Options (right softkey). 2.
Adding a To Do List Item to the Calendar To add your To Do List item to the calendar: 1. From the To Do List display (see page 144), select the 2. Highlight Add To Schedule and press . Add To Schedule copies the item from the To Do List and makes it a scheduled event. (Adding an item to the schedule does not remove it from your To Do List.) 3. Enter the event description using your keypad and press . (See “Adding an Event to the Calendar”on page 138 for entering.) 4. Press Save (left softkey).
Viewing Memory in Your Calendar To view available memory space and options: 1. From the Calendar display (see page 138), press Options (right softkey). 2. Highlight View Memory and press 3. Select Schedule ( . ), Call Alarm ( ), or To Do List ( ). (The available memory space and options display.) ABC DEF Purging All Events, Call Alarms, or To Do List Items To delete all scheduled events, call alarms, or To Do List items: 1. From the Calendar display (see page 138), press Options (right softkey). 2.
Displaying Phone Information Displaying Your User Address 1. Press Calendar & Tools To display the phone’s current user address: to access the main menu. 2. Select Settings. 3. Select Phone Info ( ). 4. Select Phone#/User ID ( ). If you sign out, appears on the display. Finding Icon Definitions To view an explanation of icons that appear on the display: 1. Press to access the main menu. 2. Select Settings. 3. Select Phone Info ( 4. Select Help ( ABC ). ). 5.
Displaying the Version Information To display the version number of the software, hardware, PRL (Preferred Roaming List), PRI (Product Release Instructions), etc., installed on your Sprint PCS Phone: 1. Press to access the main menu. 2. Select Settings. 3. Select Phone Info ( 4. Select Version ( ). ). DEF Displaying Advanced Information To display advanced information such as technology and frequency: 1. Press to access the main menu. 2. Select Settings. 3. Select Phone Info ( 4.
Using Your Phone’s Tools In addition to helping you be more efficient and organized, your Sprint PCS Phone offers useful and entertaining tools. Calendar & Tools Using the Alarm Clock Your phone comes with a built-in alarm clock with multiple alarm capabilities. You can set up to 5 alarms. To use the alarm clock: 1. Press to access the main menu. 2. Select Tools. 3. Select Alarm Clock ( DEF ). Press Settings (right softkey) to set the Ringer Length or Snooze Interval. 4.
To stop the alarm: Press any key to stop the alarm. (The alarm will snooze and then sound again after the selected snooze interval.) Press and hold the side camera key to cancel snoozing. Press Dismiss (right softkey) to dismiss the alarm. Using the Countdown Timer This feature allows you to use the countdown timer with alarm capabilities. You can set up to 5 timers. To use the countdown timer: 1. Press to access the main menu. 2. Select Tools. 3. Select Countdown ( GHI ).
Using the Stop Watch To start the stop watch: 1. Press to access the main menu. Calendar & Tools 2. Select Tools. 3. Select Stop Watch ( JKL ). Press Start (left softkey) to start the stop watch operation. Press Stop (left softkey) to stop the stop watch operation. Press Resume (left softkey) to start the stop watch operation again. To record a lap time while the stop watch is running: Press Lap (right softkey) to record time of first lap.
Using the World Clock To set the world clock display: 1. Press to access the main menu. 2. Select Tools. 3. Select World Clock ( ). MNO 4. The world clock display appears. Press the navigation key right or left to change countries. Tip: Press Summer (left softkey) or Standard (right softkey) to select between daylight savings and standard time (if applicable). The icon is shown in summer mode. Using the Calculator Your phone comes with a built-in calculator. To use the calculator: 1.
Updating Your Phone To update your phone: 1. Press Yes (left softkey) when an update notification appears. 2. Read the information screen and press Next (left softkey) to continue. 3. Select Update Phone to update your phone’s software version. To update your phone through the Tools menu: 1. Press to access the main menu. 2. Select Tools. 3. Select Update Phone ( TUV ). 4. If a new software version is available, press Yes (left softkey) to continue. 5.
Printing Pictures Using PictBridge Your Sprint PCS Phone is PictBridge compatible, allowing you to print directly from your phone without connecting to a computer. Simply connect your phone to a PictBridge-enabled printer using the supplied USB cable and enjoy printing your photos. Printing Pictures Directly From Your Phone To print pictures directly from your phone: 1. Press to access the main menu. (Make sure your phone is fully charged.) 2. Select Tools. 3. Select PictBridge ( 4.
Print Size:You can set the print size from Default Printer, 4”x6”, 5”x7”, 8”x10”, or Letter. (Print Size differs depending on the type of printer you have.) Date Stamp:You can imprint the date on your pictures. Select On or Off. (Correct Date Stamp may not be placed depending on the type of printer you have.) Calendar & Tools 8. When you are finished selecting the printer settings, press Print (right softkey). 9. When finished printing, press or . 10. Select Yes.
156
Section 2I Using Your Phone’s Voice Services In This Section Voice Services Using Automatic Speech Recognition Using the Voice Memos Setting Up Screen Call Your Sprint PCS Phone’s Voice Services let you place calls using your voice, store voice reminders, and record memos right on your phone.This section includes easy-to-follow instructions on using voice-activated dialing and managing voice recordings.
Using Automatic Speech Recognition Your Sprint PCS Phone is equipped with an Automatic Speech Recognition (ASR) feature. This feature allows you to make calls or use the phone’s functions by simply using your voice. All you have to do is to talk into the phone, and the phone will recognize your voice and complete tasks by itself. You can activate Automatic Speech Recognition whether the phone is open or closed.
Call Voice Tag to call the name or phone number stored in the Voice Tag List. (See page 162 for details.) Tools to select additional commands from Digit Training, Add Voice Tag, Review Voice Tag, Erase Voice Tag, or Phone Status. Help to get instructions for Automatic Speech Recognition. (See page 169 for details.) Ready Link to place a Ready Link call from the Sprint PCS Ready Link List. (See page 166 for details.
Making a Voice Call by Using ASR With ASR, you can make a voice call by speaking a name, phone number, or using a voice tag. To make a voice call by speaking a name: 1. Press to activate the Command menu. 2. Say “Contact”to your phone. 3. Say the full name of a contact in your Contacts list (e.g., “John Jones”). 4. Say the phone type you’d like to call (e.g., “Mobile”). Shortcut: To execute several commands at a time, you can also say several commands continuously (e.g., “Contact, John Jones, Mobile”).
To make a call by speaking a phone number: 1. Press to activate the Command menu. 2. Say “Dial Number”to your phone. 3. Say the digits of the phone number using a natural voice. Shortcut: You can also say “Dial Number”followed by the number you want to call. your voice. 5. When you are finished, press . Note: If the phone does not recognize the number, the phone will find the most likely match number and display a list of up to three numbers.
Finding Contacts List Entries This feature allows you to find an entry in your Contacts list by saying the name. To find a contact in the Contacts list: 1. Press to activate the Command menu. 2. Say “Find Contact”to your phone. 3. Say the full name of a contact in your Contacts list (e.g., “John Jones”). 4. The phone will display the contact details for the recognized name. 5. To make a call, select the desired number from the list by using your navigation key and press or .
Programming a Voice Tag To program a voice tag: 1. Press to activate the Command menu. 2. Say “Tools.” 3. Say “Add Voice Tag.” 4. Say the digits of the phone number. Voice Services 5. Say “Yes”to confirm or “No”to cancel. 6. Say the name you want to add. 7. Respond to the prompt by repeating the name after the beep. (You will hear a confirmation that voice tag has been successfully saved.) Tip: Record voice tags in a quiet environment. ReviewingVoice Tags To review voice tags: 1.
Erasing a Voice Tag To erase a voice tag: 1. Press to activate the Command menu. 2. Say “Tools.” 3. Say “Erase Voice Tag.” 4. Say the name you want to erase from your voice tag list. (The name will be repeated and you will be asked to verify it.) 5. Say “Yes”to confirm or “No”to cancel. (You will hear a confirmation that the voice tag has been successfully erased.) Tip: You can erase all voice tags through your phone’s Settings menu. (See “Erasing All Voice Tags”on page 95.
Making International Calls by Using ASR Your phone’s ASR Dialing feature allows you to make international calls by speaking the digits of the country code. To make international calls by using ASR: 1. Press to activate the Command menu. 2. Say “International.” 3. Say the digits of the country code. Voice Services 4. Say the digits of the phone number. 5. The phone automatically places the call if it recognizes your voice. 6. When you are finished, press .
Making a Sprint PCS Ready Link Call by Using ASR You can place a Sprint PCS Ready Link call by using automatic speech recognition from your Sprint PCS Ready Link List. To make a Sprint PCS Ready Link Call, your phone’s Sprint PCS Ready Link mode must be set to Enable. (See “Setting Sprint PCS Ready Link Mode”on page 208 for details.) To make a Sprint PCS Ready Link Call: 1. Press to activate the Command menu. 2. Say “Ready Link.”(The Command menu of your Sprint PCS Ready Link List will display.) 3.
4. Say “Contact,”“Group,”“Company Contact,” “Company Group,”or “Dial Number.” 5. Say the contact’s name in your Sprint PCS Ready Link List or the digits of the phone number. (Wait for the prompt.) 6. Respond to the prompt by saying the name or group name. Voice Services To place the call, press . (See “Making and Receiving a Sprint PCS Ready Link Call”on page 211 for details.) Tip: If you say “Contact”or “Dial Number”during step 4 above, you can say following commands continuously (e.g.
Using DigitTraining This feature allows you to train the phone to recognize your voice when speaking a phone number. You can get better recognition accuracy by programming your intonation pattern into your phone. To program DigitTraining: 1. Press to activate the Command menu. 2. Say “Tools.” 3. Say “DigitTraining.” 4. Say “Start”or press Start (left softkey) to start programming. 5. Follow the voice prompts and recite the digits into your phone’s microphone.
To deactivate DigitTraining: 1. Press to activate the Command menu. 2. Say “Tools.” 3. Say “DigitTraining.” 4. Say “Off”or press Off (right softkey) to deactivate the Opening the Main Menu by Using ASR This feature allows you to open an application or access a menu by saying “Go to”followed by an item in the main menu. To access the main menu by using ASR: 1. Press to activate the Command menu. 2. Say “Go to”and the menu you want to open (e.g., “Go to Messaging”). 3.
Using the Voice Memos You can use your phone’s Voice Services to record brief memos to remind you of important events, phone numbers, or grocery list items. Tip: If you haven’t signed up for Sprint PCS Ready Link service and Ready Link mode is set to Disable (see page 208), you can use the Ready Link/Memo button ( ) as a Voice Memo button in standby mode. Displaying the Voice Memo Menu To display the voice memo menu: 1. Press to access the main menu. 2. Select Tools. 3. Select Voice Services ( 4.
Recording a Voice Memo To record a voice memo: 1. From the voice memo menu, select Record ( Rec.:Speaker ( ABC ) or ). 2. Start recording after the beep. 3. To finish recording, press , , or . Voice Services To record the other party’s voice during a phone call: 1. During a call, press Options (right softkey). 2. Select Tools. 3. Select Voice Services. 4. Select Voice Memo ( 5. Select Record ( ). ). 6. Start recording after the beep. 7. To finish recording and the conversation, press .
Reviewing Voice Memos To play the voice memos you have recorded: 1. From the voice memo menu, select Play ( Play:Speaker ( GHI DEF ) or ). 2. Select the memo you want to play. – or – Select All to play all memos continuously. 3. Press to stop playing. Press Slow (left softkey) or Fast (right softkey) to change the playing speed. Tip: To set the speakerphone mode on or off, press Options (right softkey), highlight Speaker On/Off, and press during step 2 above.
Setting Up Screen Call This feature enables you to screen incoming calls by using a recorded announcement, either one that is pre-recorded or one that you record. Activating Screen Call To start Screen Call when you have incoming calls: Voice Services 1. When the phone rings or vibrates, press Options (right softkey) to display the options. 2. Highlight Screen Call and press . To set Auto Screen Call: 1. Press to access the main menu. 2. Select Tools. 3. Select Voice Services ( 4.
Selecting an Announcement for Screen Call To select a Screen Call announcement: 1. Press to access the main menu. 2. Select Tools. 3. Select Voice Services ( 4. Select Screen Call ( ABC ). ). 5. Select Announcement. 6. Depending on your preference, select Pre-Recorded ( 174 ) or Custom ( ABC ).
Recording Your Name for a Pre-Recorded Announcement You can use a pre-recorded announcement with or without your name. If you record your name, your phone uses your name recording to announce that you are not available to answer the call. To record your name: to access the main menu. Voice Services 1. Press 2. Select Tools. 3. Select Voice Services ( 4. Select Screen Call ( ABC ). ). 5. Select Announcement. 6. Highlight Pre-Recorded and press Edit (right softkey). 7.
Recording a Customized Announcement To record an announcement: 1. Press to access the main menu. 2. Select Tools. 3. Select Voice Services ( 4. Select Screen Call ( ABC ). ). 5. Select Announcement. 6. Highlight Custom and press Edit (right softkey). 7. Highlight Record and press . When an announcement has already been recorded, select Yes to overwrite the existing recording. 8. Press to start the first recording. 9. Press to stop recording. 10.
Reviewing an Announcement To review an announcement: 1. Press to access the main menu. 2. Select Tools. 3. Select Voice Services ( 4. Select Screen Call ( ABC ). ). Voice Services 5. Select Announcement. 6. Highlight Pre-Recorded or Custom and press Edit (right softkey). 7. Highlight Play or Play:Speaker and press . Erasing an Announcement To erase an announcement: 1. Press to access the main menu. 2. Select Tools. 3. Select Voice Services ( 4. Select Screen Call ( ABC ). ). 5.
178 Section 2I: Using Your Phone’s Voice Services
Section 2J Using Your Phone’s Built-in Camera In This Section Taking Pictures Recording Videos Storing Pictures and Videos Sending Sprint PCS Picture Mail SM Camera Managing Sprint PCS Picture Mail Your Sprint PCS Phone’s built-in camera gives you the ability to take full-color digital pictures, view your pictures using the phone’s display, and instantly send them to family and friends.
Taking Pictures Taking pictures with your phone’s built-in camera is as simple as choosing a subject, pointing the lens, and pressing a button. You can activate the phone’s camera mode whether the phone is open or closed. To take a picture with the phone open: 1. Press to access the main menu. 2. Select Pictures to access the Pictures menu. 3. Select Camera to activate camera mode. (Additional camera options are available through the camera mode Options menu.
Order Prints to order prints of the pictures. You can select to receive prints by mail or at a retail store. Post to Services to access the available services. Select Update to display the latest services. Upload to upload the picture you just took to the Sprint PCS Picture Mail Web site (www.sprint.com/picturemail). Review Media to go to the In Phone folder to review your saved pictures. Delete to delete the picture you just took. Set as to assign the picture.
SM Creating Your Sprint PCS Picture Mail Password The first time you use any of the picture management options involving the Sprint PCS Picture Mail Web site, you will need to establish a Sprint PCS Picture Mail password through your Sprint PCS Vision Picture Phone. This password will also allow you to sign in to the Sprint PCS Picture Mail Web site at www.sprint.com/picturemail to access and manage your uploaded pictures and albums. To create your Sprint PCS Picture Mail password: 1.
Camera Mode Options When the phone is open and in camera mode, press Options (right softkey) to display additional camera options: Picture Mode to select picture mode from Normal, Beach/Snow, Scenery, Soft Focus, Mirror Image, Night/Dark, or Sharp. Flash to activate the flash. (See “Setting the Flash”on page 185 for details.) Zoom to zoom in on a subject. (See “Using the Zoom”on page 187 for details.) Self-Timer to activate the camera’s timer.
Camcorder Mode to switch to video mode. (See “Recording Videos”on page 191 for details.) Key Guidance to indicate the key functions in camera mode. Favorite Settings to select your favorite setting. (See “Setting Your Favorite Mode”on page 188.) Using the Normal/Macro Switch The normal/macro switch located on the front of the phone allows you to take close-up shots. Slide the normal/macro switch to switch between Normal and Macro (close-up) modes.
Setting the Flash To activate the flash: 1. From camera mode, press Options (right softkey). 2. Highlight Flash and press . 3. Select your desired option and press . Note: While the phone is open and in camera mode, press to switch between flash modes. Setting the Self-Timer To activate the self-timer: 1. From camera mode, press Options (right softkey). Camera 2. Highlight Self-Timer and press . 3. Highlight the length of delay you want the timer to use (10 Seconds or 5 Seconds) and press .
Taking Stitch Shots Stitch shot allows you to stitch separate images together. With this feature, your phone’s viewfinder is divided in two and you can shoot each part separately. When you shoot the first part, the camera displays a section of the previous part, so you can line up the next picture with the first one. To take a stitch shot: 1. From camera mode, press Options (right softkey). 2. Highlight Fun Tools and press . 3. Highlight Stitch Shot and press . 4.
Using the Zoom This feature allows you to zoom in on an object when you take a picture. You can adjust the zoom from 1x to 20x, depending on your resolution settings. To use the zoom: 1. From camera mode, press the navigation key right or left, or the Side Volume key up or down to adjust the zoom. (The gauge bar appears.) 2. Press Capture (left softkey), , , or the side camera key to take the picture. (The picture will automatically be saved to your In Phone folder.
Setting Your Favorite Mode With your Sprint Power Vision Multimedia Phone, you can customize various camera settings. This feature allows you to save your favorite setting. To set your favorite mode: 1. From camera mode, select your favorite setting. (See page 183 for Camera mode options and see “Selecting Camera Settings”on page 189.) 2. Press Options (right softkey). 3. Highlight Favorite Settings and press . 4.
Selecting Camera Settings To select your camera settings: 1. From camera mode, press Options (right softkey). 2. Highlight Camera Settings and press . 3. Select an option from the following. Resolution to select a picture’s file size (1.3M960x1280, Medium-480x640, or Low-240x320). Quality to select the picture quality setting (Fine, Normal, or Economy). Shutter Sound to select a shutter sound. (See “Setting the Shutter Sound”.) Status Bar to switch the status bar display on or off.
Camera Icon Indication Function Flash Icons To use the flash for only one shot. On Always To use a flash every time you take a picture. Auto To use the auto flash function. Beach/Snow Use this setting in bright light. Scenery Picture Mode White Balance Brightness Resolution Use this setting for scenery from a distance. Soft Focus Use this setting to “soften” the picture. Mirror Image Use this setting to take a mirror image. Night/Dark Use this setting in low light.
Recording Videos In addition to taking pictures, you can also record, view, and send videos to your friends and family with your phone’s builtin video camera. To record a video: 1. Press to access the main menu. 2. Select Pictures to access the Pictures menu. 3. Select Camcorder to activate video mode. (Additional video options are available through the video mode Options menu. See “Video Mode Options”on page 193 for more information.) Camera 4.
Post to Services to access the available services. Select Update to display the latest services. Upload to upload the video you just took to the Sprint PCS Picture Mail Web site. Review Media to go to the In Phone folder to review your saved videos. Delete to delete the video you just took. Set as to assign the video. Select your desired option and press . Details/Edit to edit or display your video’s details. To take a video with the flip closed: 1.
Video Mode Options Several options are available from video mode. Press Options (right softkey) to display additional options: Video Mode to select video mode from Normal, Beach/Snow, Scenery, Soft Focus, Mirror Image, or Night/Dark. Video Light to select a Video Light setting. Select On to light the video light. Zoom to zoom in on an object. You can adjust the zoom from 1x to 20x. Self-Timer to activate the timer function. (See “Setting the Self-Timer”on page 185 for details.
Selecting Camcorder Settings To select your camcorder settings: 1. From video mode, press Options (right softkey). 2. Highlight Camcord.Settings and press . 3. Select an option from the following. Resolution to select a file size (Good-176x144 or Medium-128x96) for a video. Quality/Length to select video quality from Economy-30sec., Normal-20sec., or Rich-15sec.. Silent Movie to select On to record without sounds. Select Off to deactivate this feature. Cue Sound to select a cue sound.
Setting the Cue Sound To select the Cue Sound: 1. From video mode, press Options (right softkey). 2. Highlight Camcord.Settings and press . 3. Select Cue Sound. 4. Select an option from the following. Default plays the default cue sound. “Action & Cut” notifies you with the pre-recorded words. “Ready & Stop” notifies you with the pre-recorded words. Off makes no sound. Record Your Own allows you to record your own voice for a cue sound. Select Start Sound or End Sound.
Video Icon Indication Function Icons Video Light White Balance Brightness Sunny Use this setting for sunny weather. Cloudy Use this setting for cloudy weather. Tungsten Use this setting for standard household lighting. Fluorescent Use this setting for fluorescent lighting. Manual For the manual setting of white balance. Manual For the manual setting of brightness. Beach/Snow Scenery Video Mode Details Appears when the video light setting is on. Use this setting in bright light.
Storing Pictures and Videos There are two types of storage areas for your pictures and videos that can be used separately according to your needs: In Phone (see below) Online Album (see page 205) In Phone Folder The storage area of your phone is called the In Phone folder. From the In Phone folder, you can view the saved pictures and videos in your phone, send them to the Sprint PCS Picture Mail Web site (www.sprint.com/picturemail), delete images, and access additional options.
In Phone Folder Options When you are viewing the In Phone folder, press Options (right softkey) to display the following options: Play to play your videos. Send to Contacts to send your pictures and videos. (See page 200 for details.) Upload to upload pictures and videos from the In Phone folder to the Sprint PCS Picture Mail Web site (www.sprint.com/picturemail). Order Prints to order prints of the pictures. You can select receive prints by mail or at retail store.
Assigned Media Folder When you assign a picture or video, it will automatically be saved in the Assigned Media folder. The folder allows you to store copies of pictures on your phone and to assign pictures and videos to various phone tasks. To save a picture or video to the Assigned Media folder: 1. From the In Phone folder (see “In Phone Folder”on page 197), select a picture or video you wish to save to the Assigned Media folder and press . 2. Press Options (right softkey). 3. Select Set as. Camera 4.
SM Sending Sprint PCS Picture Mail Once you’ve taken a picture or video, you can use the messaging capabilities of your phone to instantly share it with family and friends. You can send it to up to 25 people at a time using their email addresses or their Sprint PCS Phone Numbers. Sending Pictures and Videos From the In Phone Folder To send pictures and videos from the In Phone folder: 1. Press to access the Pictures menu. 2. Select My Albums. 3. Select In Phone. 4.
9. Follow the system prompts to add data, such as title, message, etc. 10. Press the appropriate softkey to send the pictures and videos. Tip: If a message fails, you are prompted to send it manually. If you choose to send it later, the message goes to the Pending Picture Mail Folder. To access the folder, from the main menu select Pictures > Picture Mail > Pending.
Sending Pictures From Messaging You can also send Sprint PCS Picture Mail from your phone’s Messaging menu. To send pictures from the Messaging menu: 1. Press to access the main menu. 2. Select Messaging to access the Messaging menu. 3. Select Send Message. 4. Highlight Picture Mail and press . 5. Select Phone Book Entry, Mobile, or Email to select or enter recipients. 6. Press Next (left softkey). 7. Highlight In phone or Online Albums and press . 8.
Managing Sprint PCS Picture Mail Using the Sprint PCS Picture Mail Web site Once you have uploaded pictures and videos from your phone to your online Sprint PCS Picture Mail account at www.sprint.com/picturemail (see “In Phone Folder Options”on page 198), you can use your personal computer to manage your pictures. From the Sprint PCS Picture Mail Web site (www.sprint.com/picturemail), you can share pictures and videos, edit album titles, add captions, and organize images.
Viewing Sprint PCS Picture Mail When you receive Sprint PCS Picture Mail, its summary is automatically saved to your Picture Mail folder. The entire message is saved on the Sprint PCS Picture Mail server. To view the entire message: 1. Press to access the main menu. 2. Select Pictures or Messaging. 3. Select Picture Mail. 4. Select Inbox, Sent Mail, or Saved Mail. 5. Highlight the message you want to display and press . (To display the message options, press Options [right softkey].
Managing Online Pictures and Videos From Your Phone You can use your phone to manage, edit, or share pictures and videos you have uploaded to the Sprint PCS Picture Mail Web site at www.sprint.com/picturemail. To view your online pictures and videos from your phone: 1. Press to access the main menu. 2. Select Pictures to access the Pictures menu. Shortcut: Instead of steps 1 and 2 above, press . 3. Select My Albums. 5. Highlight an album title and press Camera 4. Select OnlineAlbum. to display. 6.
Uploading Pictures and Videos To upload pictures and videos: 1. Press to access the Pictures menu. 2. Select My Albums. 3. Select In Phone. (Thumbnails will display.) 4. Select the picture(s) and video(s) you wish to upload and press Options (right softkey). 5. Highlight Upload and press . 6. Highlight This, Selected, or All and press 7. Highlight “Uploads”Area and press – or – Highlight Other Albums, press desired album and press . . .
Section 2K SM Using Sprint PCS Ready Link In This Section Getting Started With Sprint PCS Ready Link Making and Receiving a Sprint PCS Ready Link Call Adding and Editing Ready Link Contacts Erasing Ready Link List Entries Updating Sprint PCS Ready Link Lists Sprint PCS Ready Link Managing Sprint PCS Ready Link Settings Your MM-7500 by Sanyo gives you the ability to quickly connect with other Sprint PCS Ready Link users for “walkie-talkie-style”communication from anywhere, to anywhere on the
Getting Started With Sprint PCS Ready Link Sprint PCS Ready Link allows you to enjoy quick, two-way, “walkie-talkie-style”communication with your friends, family, and co-workers. You can make one-to-one or one-tomany calls (up to five others on the same call) to any other Sprint PCS Ready Link user, anywhere on the Nationwide Sprint PCS Network. You can make and receive Sprint PCS Ready Link calls when your phone displays the Ready Link icon.
Preparing Your Phone for Sprint PCS Ready Link Service Every time you turn on your phone, your phone will identify itself and make itself available to the Ready Link network. When the Ready Link icon appears on the display, your phone is ready to make and receive Sprint PCS Ready Link calls. Ready Link Call Alerts There are several ways your phone alerts you during Sprint PCS Ready Link calls.
Main LCD Display during a Ready Link Call Sprint PCS Ready Link Main Screen Redial Contact Current List Contact Names Go to (left softkey) Options (right softkey) Sprint PCS Ready Link In-Call Screen Contact Name R-Link Number Floor Status 210 Section 2K: Using Sprint PCS Ready Link
Making and Receiving a Sprint PCS Ready Link Call Displaying the Sprint PCS Ready Link List From standby mode, press the Ready Link/Memo button on the side of your phone ( ) to access the Sprint PCS Ready Link List. Tip: The first time you access the list, the Sprint PCS Ready Link Help message will appear. Press Yes (left softkey) and Next (left softkey) to read a brief introduction to Sprint PCS Ready Link. Selecting a Contacts List Company List/ Company Grps.
Incoming shows the last 20 different Sprint PCS Ready Link calls you accepted. Missed shows the last 20 Sprint PCS Ready Link calls you missed. Note: The icon next to the group name indicates a group. Making a Sprint PCS Ready Link Call (One-to-One Call) You can place a one-to-one Sprint PCS Ready Link call by selecting a contact from the Sprint PCS Ready Link List. To place a Sprint PCS Ready Link call by selecting a contact: 1. Press . 2.
Note: During a Sprint PCS Ready Link call, the “floor”is the right to speak. When you see “Floor is open.,”the first person to press the Ready Link button can speak (while holding the button). Only the person who has the floor can speak. The phone beeps if you press the Ready Link button when another contact has the floor. 4. Continue holding as you speak. (When you are finished speaking, release to allow the other contact to speak.
Making a Sprint PCS Ready Link Call (Group Call) You can make a Sprint PCS Ready Link call to all members in a Group entry, which you have in your Sprint PCS Ready Link List. You can communicate with up to five members at a time. To place a Sprint PCS Ready Link Group call: 1. Press . 2. Press Go to (left softkey), highlight the list from which you want to make a Group call (Company Grps. or Personal Grps.), and press . 3.
Making a Sprint PCS Ready Link Call by Entering a Number To place a Sprint PCS Ready Link call by entering a number: 1. From standby mode, enter the Sprint PCS Ready Link number you want to dial. 2. Press to place the Sprint PCS Ready Link call. Continue holding to take the floor and speak. 3. Continue with the Sprint PCS Ready Link call, pressing and holding others to reply. to speak and releasing it to allow 4. When the call is finished, press . – or – 1. Press . press . 3.
Missed Call Notification for Sprint PCS Ready Link Calls When an incoming Sprint PCS Ready Link call is not answered, the Missed Call Notification and the icon are displayed on your screen. To call the last Missed Sprint PCS Ready Link call: Simply press while the Missed Call Notification is displayed. (Continue with the Sprint PCS Ready Link call as described previously.) To erase the Missed Call log: 216 Press Dismiss (right softkey).
Receiving a Sprint PCS Ready Link Call To receive a Sprint PCS Ready Link call: 1. Make sure your phone’s Sprint PCS Ready Link mode is enabled. (See “Setting Sprint PCS Ready Link Mode”on page 208.) 2. When you receive a Sprint PCS Ready Link call from a contact, “R-Link Call,”the contact’s name, and the Sprint PCS Ready Link number appear on the display. (You do not need to take any action to answer the call.
Sprint PCS Ready Link Options When you use Sprint PCS Ready Link, several user options are available by pressing Options (right softkey). To select an option, highlight it and press . 218 Edit to edit a Sprint PCS Ready Link number and/or name. Send Message to send a text or voice message, picture, or video. Copy to Personal to copy a contact to the Personal List. Copy Group appears when you copy a Company Group to the Personal Group List. Copy to Ph.
Adding and Editing Ready Link Contacts Copying an Entry to Your Personal List or Personal Group List You can copy an entry to your Personal Lists from several different sources. If the selected entry is already stored in the Personal Lists, the “copy”option does not appear. To copy an entry from the Sprint PCS Ready Link List: 1. Press . 2. Press Go to (left softkey), highlight the list from which you want to copy an entry (Company List, Company Grps., Personal Grps.
Saving a Sprint PCS Ready Link Number You can save a Sprint PCS Ready Link number from the ending display to your Personal Lists. To save the number: 1. From the end display, press Save (right softkey). 2. Enter a name and press OK (left softkey). 3. Press Save (left softkey). 4. Press Yes (left softkey). Note: If the number is already stored in the Personal List or Personal Groups, the “Save”softkey does not appear.
Adding a New Contact to Your Personal List You can store a total of 200 entries in the Personal Lists. To add a new Sprint PCS Ready Link contact: 1. Press . 2. Press Go to (left softkey), highlight Personal List, and press . 3. Select . 4. Enter a name for the new contact and press . (This is the name you will see when calling or receiving a call from the contact.) 5.
Adding a New Group to Your Personal Group List You can add new groups to the Personal Group List. Each group can include up to five members. You can enter a group member directly or select the member from the Company List or Personal List. To add a new Sprint PCS Ready Link group entry: 1. Press . 2. Press Go to (left softkey), highlight Personal Grps., and press . 3. Select . 4. Enter a Group Name, press , and press Next (left softkey). 5.
Editing a Contact in Your Personal List To edit a Personal List contact: 1. Press . 2. Press Go to (left softkey), highlight Personal List, and press . 3. Scroll to the entry you want to edit and press Options (right softkey). 4. Highlight Edit and press . 5. Select the field you want to edit (Name or R-Link Number), and press . 6. Edit the entry, press OK (left softkey), and press Save (left softkey) to save your changes.
Editing a Group in Your Personal Group List To edit a group in your Personal Group List: 1. Press . 2. Press Go to (left softkey), then highlight Personal Grps. and press . 3. Scroll to the group entry you want to edit and press Options (right softkey). 4. Highlight Edit and press . 5. Edit the group name and press OK (left softkey). Tip: If you don’t need to edit the group name, press Next (left softkey) during step 5 above and skip step 6. 6. Press Save (left softkey) to save your changes. 7.
8. Highlight Edit and press . 9. Select the field you want to edit (Name or R-Link Number) and press . 10. Edit the entry, press OK (left softkey), and press Save (left softkey) to save your changes. 11. Press Update (left softkey) to update your Personal Group List.
Erasing Ready Link List Entries Erasing an Entry in Your Personal List or Personal Group List To erase a contact or a group: 1. From the Sprint PCS Ready Link List, press Go to (left softkey), then highlight Personal List or Personal Grps. and press . 2. Scroll to the entry you want to erase and press Options (right softkey). 3. Highlight Erase and press . Erase Group appears when you select Personal Groups. 4. Select Yes. To erase a group member: 1.
Erasing a Sprint PCS Ready Link List You can erase all entries saved in the Sprint PCS Ready Link List (except Company List/Company Groups). To erase a Sprint PCS Ready Link List: 1. From the Sprint PCS Ready Link List, press Options (right softkey). 2. Highlight Erase R-Link List and press 3. Select your desired option and press . . Outgoing to erase all outgoing Sprint PCS Ready Link calls. Incoming to erase all incoming Sprint PCS Ready Link calls.
Updating Sprint PCS Ready Link Lists Updating the Company List and Personal List To update your Company List and Personal List manually through the Sprint PCS Ready Link server: 1. Press to access the main menu. 2. Select Settings. 3. Select Ready Link ( 4. Select List Update ( ). GHI ). ABC Managing Sprint PCS Ready Link Settings Assigning Speed Dialing for Sprint PCS Ready Link Entries To assign Speed Dialing for Sprint PCS Ready Link entries: 1. Press to access the main menu. 2.
5. Press Go to (left softkey), highlight the list from which you want to set a speed dial (Company List, Company Grps., Personal List, or Personal Grps.), and press . 6. Select the contact. – or – Select the group and press and press . , then highlight an option Assign to assign the selected group as a speed dial. Details to display the group details. You can select the group member from the group list.
Setting Ready Link Guard This feature enables you to display the warning message when you cannot receive Sprint PCS Ready Link calls. The warning message will appear when you are launching a Web or Java application or sending or uploading your pictures and videos. To set the Ready Link Guard: 1. Press to access the main menu. 2. Select Settings. 3. Select Ready Link ( GHI 4. Select R-Link Guard ( ). ). (A message will appear.) PQRS 5. Press OK (left softkey) to continue. 6. Select On.
Setting Vibrate Pattern for Sprint PCS Ready Link Calls You can select your favorite vibrate pattern for Sprint PCS Ready Link calls. To select the vibrate pattern for Sprint PCS Ready Link calls: 1. Press to access the main menu. 2. Select Settings. 3. Select Ready Link ( 4. Select Sounds ( GHI DEF 5. Select Vibrate Type ( ). ). ABC ). 6. Select Ready Link Calls or R-Link Missed. 7. Select your desired vibrate pattern and press .
Setting an Alert Notification for Sprint PCS Ready Link Calls Your phone can alert you with an audible tone when you receive a Sprint PCS Ready Link call. To set alerts for Sprint PCS Ready Link calls: 1. Press to access the main menu. 2. Select Settings. 3. Select Ready Link ( 4. Select Sounds ( 5. Select Alerts ( GHI ). DEF DEF ). ). 6. Select an option from the following. Ready Link Calls to notify you when you receive a Ready Link call.
Setting the Speakerphone for Sprint PCS Ready Link Calls You can set the speakerphone on or off when Sprint PCS Ready Link is activated. By default, the speakerphone is set to on. To set the speakerphone on or off: 1. Press to access the main menu. 2. Select Settings. 3. Select Ready Link ( ). GHI 4. Select Speakerphone ( GHI ). 5. Select On or Off. Note: If the phone’s ringer volume is set to Vibrate, Ringer off, or Silence All, the speakerphone turns off. Press mode on.
Setting the Floor Display of the Sprint PCS Ready Link Calls With this feature, you can select the floor display during Sprint PCS Ready Link calls. To select the floor display: 1. Press to access the main menu. 2. Select Settings. 3. Select Ready Link ( ). GHI 4. Select Floor Display ( MNO ). 5. Select your desired display.
Section 2L Using Your Phone’s Built-In Media Player In This Section Your Multimedia Channel Options Accessing Your Channel Listings Playing a Video or Audio Clip SprintTV FAQs Media Player Your Sprint Power Vision Multimedia Phone’s built-in media player gives you the ability to listen to audio clips and view video clips right from your phone’s display.
Your Multimedia Channel Options Sprint PCS Vision Multimedia Service offers a variety of accessible audio or video channels, depending on your Sprint PCS Service Plan and multimedia subscriptions. Your subscription options include a comprehensive basic service as well as a full menu of a variety of additional channel options. Preview Channel:This free channel lets you sample clips from all of the available channels before you make a decision to subscribe.
Accessing Your Channel Listings It’s easy to access and view the multimedia Channel Listings on your MM-7500 by Sanyo from the phone’s main menu. To access your Media Player and Channel Listings: 1. Press from standby mode to display the phone’s main menu. 2. Select SprintTV.
Playing aVideo or Audio Clip To select and play a media clip: 1. Press from standby mode to display the phone’s main menu. 2. Select SprintTV to display your Channel Listings. 3. Use your keypad to enter a channel number (or use your navigation key to scroll to a channel and press ). My Channels: If you have selected a channel that you’ve already signed up for (or if it’s a channel with no monthly fee), you will see a list of available clips.
SprintTV FAQs 1. How does my phone’s SprintTV Service differ from Video Mail? Sprint TV Service lets you access high-quality video and audio clips provided by external sources. Video Mail lets you capture, upload and share videos that you personally create with your phone’s built-in camcorder. 2. Will I know if I’m receiving an incoming call while I’m viewing or listening to an audio clip? No. Incoming calls will roll into voicemail while you are playing a clip.
5. Are the videos that I’m viewing “live”videos? It depends on the content provider. Some of the channels available through Sprint TV stream live content. Others provide media on demand with video and audio clips that are refreshed throughout the day, but that are not “live.” 6.
10. What does it mean when the video pauses and I see the word “loading”at the bottom of the screen? This happens when the media player is in the process of loading the data necessary to play the clip. It typically occurs when there is heavy traffic on the network. 11. How can I cancel service if I decide I don’t want it? To cancel your Sprint TV Service, visit www.sprint.com and sign on to My PCS with your account number and password.
242
Section 3 Sprint PCS Service Features
244
Sprint PCS Service Features: The Basics In This Section Using Voicemail Using Text SMS Messaging Using Voice SMS Messaging Using Caller ID Responding to Call Waiting Making a Three-Way Call Using Call Forwarding Now thatyou’ve mastered your phone’s fundamentals, it’s time to explore the calling features thatenhance your SprintPCS Service.This section outlines your basic Sprint PCS Service features.
Using Voicemail Setting UpYour Voicemail All unanswered calls to your Sprint PCS Phone are automatically transferred to your voicemail, even if your phone is in use or turned off. Therefore, you will want to set up your Sprint PCS Voicemail and personal greeting as soon as your phone is activated. To set up your voicemail: 1. Press and hold . 2.
Sprint PCS Service Voicemail Notification There are several ways your Sprint PCS Phone alerts you of a new message: By displaying a message on the screen. By sounding the assigned ringer type. By the LED blinking red. By displaying at the top of your screen. New Voicemail Message Alerts When you receive a new voice message, your phone alerts you and prompts you to call your voicemail. To call your voicemail: Press . To display your Missed Log: 1. Press to access the main menu. 2.
RetrievingYour Voicemail Messages You can review your messages directly from your Sprint PCS Phone or from any other touch-tone phone. To dial from your Sprint PCS Phone, you can either speed dial your voicemail or use the menu keys. Using One-Touch Message Access Press and hold box.) . (Your phone will dial your voicemail Using the Menu Keys on Your Phone to Access Your Messages 1. Press to access the main menu. 2. Select Messaging. 3. Select Voicemail. 4.
Sprint PCS Service Using a Phone Other Than Your Sprint PCS Phone to Access Messages 1. Dial your Sprint PCS Phone number. 2. When your voicemail answers, press Shift . 3. Enter your pass code to access your voicemail box and follow the voice prompts. Tip: When you call into voicemail, you first hear the header information (date, time, and sender information) for the message. To skip directly to the message, press during the header.
Voicemail Options Your Sprint PCS Phone offers several options for organizing and accessing your voicemail. Using Expert Mode Using the Expert Mode setting for your personal voicemail box helps you navigate through the voicemail system more quickly by shortening the voice prompts you hear at each level. To turn Expert Mode on or off: 1. Press and hold to access your voicemail. (If your voicemail box contains any new or saved messages, press to access the main voicemail menu.) Shift 2. Press DEF 3.
JKL for Group Distribution Lists. Sprint PCS Service 4. Press 5. Follow the voice prompts to create, edit, rename, or delete group lists. Sprint PCS Callback Return a call after listening to a message without disconnecting from voicemail. Press after listening to a message. (Once the call is complete, you’re returned to the voicemail main menu.) TUV Voicemail-to-Voicemail Message Record and send a voice message to other Sprint PCS Voicemail users. 1.
Voicemail-to-Voicemail Message Forwarding Forward a voice message, except those marked “Private,”to other Sprint PCS Voicemail users. 1. After listening to a message, press MNO . 2. Follow the voice prompts to enter the phone number. 3. Follow the voice prompts to record your introduction and forward the voice message. Voicemail-to-Voicemail Receipt Request Receive confirmation that your voice message has been listened to when you send, forward, or reply to other Sprint PCS users. 1.
Sprint PCS Service Extended Absence Greeting When your phone is turned off or you are off the Nationwide Sprint PCS Network for an extended period, this greeting can be played instead of your normal personal greeting. 1. From the main voicemail menu, press DEF for Personal Options. 2. Press DEF for Greetings. 3. Press DEF to record an Extended Absence Greeting.
Voicemail Menu Key Following the prompts on the voicemail system, you can use your keypad to navigate through the voicemail menu. The following list outlines your phone’s voicemail menu structure.
Sprint PCS Service DEF Greetings Personal Greetings ABC Name Announcement DEF Extended Absence Greeting Shift GHI Return to Personal Options Menu Expert Mode (On/Off) TUV Place a Call Shift Disconnect Section 3A: Sprint PCS Service Features – The Basics 255
Using Text SMS Messaging With Text SMS Messaging, you can use a person’s wireless phone number to send instant text messages from your Sprint PCS Phone to their messaging-ready phone – and they can send messages to you. When you receive a new message, it will automatically display on your phone’s screen. (See “Displaying Pop-up Messages”on page 68.) In addition, Text SMS Messaging includes a variety of preset messages, such as “Can’t talk right now. Send me a message.
Sprint PCS Service ComposingText SMS Messages To compose a Text SMS message: 1. Press to access the main menu. 2. Select Messaging. 3. Select Send Message. 4. Select Text. 5. Select Phone Book Entry, Mobile or Email to select or enter recipients. Tip: You can also press Others (right softkey) to select recipients from your desired list during step 5 above (if applicable). 6. Press Next (left softkey) when you are finished selecting and entering recipients.
AccessingText SMS Messages To read a Text SMS message: When you receive a text message, it will automatically appear on your phone’s main display screen. Press View (left softkey) to read the message. Use your navigation key to scroll down and view the entire message. To reply to a Text SMS message: 1. While the message is open, press Options (right softkey), highlight Reply, and press [left softkey]). (or you can also press Reply 2. Select Text. 3.
Preset messages make sending text messages to your friends, family, and co-workers easier than ever. To edit Preset messages: 1. Press to access the main menu. 2. Select Settings. 3. Select Messaging ( PQRS 4. Select Preset Msgs ( ABC ). ). 5. Highlight a message you wish to edit and press . 6. Enter your new message or changes and press OK (left softkey). (See “Entering Text”on page 43.) To reset Preset messages: 1. Follow steps 1-4 above. 2. Press Options (right softkey). 3.
Using Voice SMS Messaging In addition to sending and receiving Text SMS messages, your phone is enabled with Voice SMS Messaging. With Voice SMS Messaging, you can quickly and easily send a voice message to other SMS-enabled Sprint PCS Phones or working email addresses without making a phone call. Just record a message and send it directly to the recipient’s phone messaging inbox. Playing a Voice SMS Message To play a Voice SMS message from the main menu: 1. Press to access the main menu. 2.
Sprint PCS Service ComposingVoice SMS Messages To compose a Voice SMS message: 1. Press to access the main menu. 2. Select Messaging. 3. Select Send Message. 4. Select Voice SMS. 5. Select Phone Book Entry, Mobile, or Email to select or enter recipients. Tip: You can also press Others (right softkey) to select recipients from your desired list during step 5 above (if applicable). 6. Press Next (left softkey) when you are finished selecting and entering recipients.
AccessingVoice SMS Messages To play a Voice SMS message: When you receive a voice message, it will automatically appear on your phone’s main display screen. Use your softkeys to view and play the voice message. To reply to a Voice SMS message: 1. From the Voice SMS inbox, press Reply (left softkey). 2. Select Voice SMS. 3. Record your reply, then press Send (left softkey).
Caller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you make a call, just follow these easy steps. To block your phone number from being displayed for a specific outgoing call: 1. Press MNO Shift PQRS . 2. Enter the number you want to call. 3. Press . To permanently block your number, call Sprint Customer Service.
Making a Three-Way Call With Three-Way Calling, you can talk to two people at the same time. When using this feature, the normal airtime rates will be charged for each of the two calls. To make a Three-Way Call: 1. Enter a number you wish to call and press . 2. Once you have established the connection, press . (This puts the first caller on hold.) 3. Dial the second number you wish to call and press . 4. When you’re connected to the second party, press again to begin your three-way call.
Call Forwarding lets you forward all your incoming calls to another phone number – even when your phone is turned off. You can continue to make calls from your phone when Call Forwarding is activated. To activate Call Forwarding: 1. Press Shift PQRS ABC . 2. Enter the area code and phone number to which your future calls should be forwarded. 3. Press . (You will hear a tone to confirm the activation of Call Forwarding.) To deactivate Call Forwarding: 1. Press Shift PQRS ABC . 2. Press .
266
Section 3B SM Sprint PCS Vision Sprint PCS Vision In This Section Getting Started With Sprint PCS Vision Accessing Messaging Downloading Premium Services Content Exploring the Web Sprint PCS Vision FAQs SM Sprint PCS Vision brings you clarity you can see and hear with advanced multimedia services.These features – including Sprint PCS Messaging, games, downloadable ringers and screen savers, and portable Web access – are easy to learn and use. Clearly, it’s a whole new way to look at wireless.
Getting Started With Sprint PCS Vision With your Sprint Power Vision Phone and Sprint PCS Service, you are ready to start enjoying the advantages of Sprint PCS Vision. This section will help you learn the basics of using your Sprint PCS Vision services, including managing your User name, launching a Vision connection, and navigating the Web with your phone.
Updating Your User Name When you change the programmed User Name and select a new one, you have to update your User Name through your Sprint PCS Phone. Sprint PCS Vision To update your User Name: 1. Press to access the main menu. 2. Select Settings. 3. Select Power Vision ( DEF 4. Select Update Profile ( DEF ). ). Finding Your User Name If you aren’t sure what your Sprint PCS Vision User name is, you can easily find it online or on your Sprint Power Vision Phone. To find your User Name: At www.
Launching a Sprint PCS Vision Connection To launch a Sprint PCS Vision connection: 1. Press to access the main menu. 2. Select Web. (Your Sprint PCS Vision connection will launch and the Sprint PCS Vision home page will display.) The Sprint PCS Vision Home Page Note: If Net Guard is enabled and displayed (see page 271), press OK (left softkey) to continue and launch the Web. While connecting, the following will appear on the screen: Connecting... Please wait.
Though the browser is open, you are not currently in an active data session - that is, no data is being sent or received. As soon as you navigate to another page, the active session will launch and you will see the “Connecting...”message. When you first connect to the Web, the Net Guard will appear to confirm that you want to connect. This feature helps you avoid accidental connections. You can disable the Net Guard in the future by selecting Always Auto-Connect when the Net Guard is displayed.
Sprint PCS Vision Connection Status and Indicators Your phone’s display lets you know the current status of your Sprint PCS Vision or Sprint Power Vision connection through indicators which appear at the top of the screen. The following symbols are used: Your Sprint PCS Vision connection is active (data is being transferred); the transmit/receive symbol will blink to indicate data transmission.
Navigating the Web Navigating through menus and Web sites during a Sprint PCS Vision session is easy once you’ve learned a few basics. Here are some tips for getting around: Sprint PCS Vision Softkeys During a Sprint PCS Vision session, the bottom line of your phone’s display contains one or more softkeys. These keys are shortcut controls for navigating around the Web, and they correspond to the softkey buttons directly below the phone’s display screen.
Selecting Once you’ve learned how to use softkeys and scroll, you can start navigating the Web. To select on-screen items: Use the navigation key to highlight the desired item, then press the desired softkey button (or press ). Tip: You’ll find that the left softkey is used primarily for selecting items. This softkey is often labeled “Go.” Tip: If the items on a page are numbered, you can use your keypad (number keys) to select an item.
Going Home To return to the Sprint PCS Vision home page from any other Web page: Press and hold . – or – Press the right softkey and select Home ( Sprint PCS Vision ). Sprint PCS Messaging Accessing Messaging You can send and receive emails and text messages and participate in Web-based chatrooms right from your Sprint Power Vision Phone. Messaging allows you to stay connected to friends, family, and co-workers 24 hours a day anywhere on the Nationwide Sprint PCS Network.
Accessing Sprint PCS Mail Sprint PCS Mail allows you to perform many of the typical email functions from your phone that you can from your personal computer. You can manage your Sprint PCS Mail account from your Sprint Power Vision Phone or from your personal computer at www.sprint.com. To access Sprint PCS Mail from your phone: 1. Press to access the main menu. 2. Select Messaging. 3. Select IM & Email.
Accessing Additional Email Providers With Sprint PCS Vision, you can use popular email services such as AOL Mail, Yahoo! Mail, MSN Hotmail and EarthLink to keep in touch, even while you’re on the go. ® ® ® 1. From the Sprint PCS Vision home page, select Messaging. 2. Select Email. 3. Select an email provider, such as AOL Mail, MSN Hotmail, Yahoo! Mail, or Earthlink. 4.
Accessing Instant Messaging Sprint PCS Vision also provides you with access to popular instant messaging (IM) clients, including AOL Instant Messenger , MSN Messenger, and Yahoo! Messenger. ® TM ® ® To access instant messaging clients from your Sprint Power Vision Phone: 1. From the Sprint PCS Vision home page, select Messaging. 2. Select Instant Messaging. 3. Select an email provider, such as AOL Instant Messenger, MSN Messenger, or Yahoo! Messenger. 4.
Accessing Wireless Chatrooms Sprint PCS Vision Sprint PCS Vision gives you the ability to join wireless chatrooms from your phone, to send text messages and icons to chatroom participants, or to launch a one-on-one (private) chatroom. To access a chatroom from the browser: 1. Press to access the main menu. 2. Select Web to launch the browser. 3. Select Messaging. 4. Select Chat. 5. Select Enter. (You will see a disclaimer for Wireless Chat.) 6. Press Go (left softkey) to accept the disclaimer. 7.
Downloading Premium Services Content With Sprint PCS Vision and your new Sprint Power Vision Phone, you have access to a dynamic variety of Premium Service content, such as downloadable Games, Ringers, Screen Savers, and other applications. (Additional charges may apply.) The basic steps required to access and download Premium Service content are outlined below. Accessing the Download Menus To access the Sprint PCS Vision download menus: 1. Press to access the main menu. 2. Select My Content. 3.
Selecting an Item to Download You can search for available items to download in a number of ways: Featured displays a rotating selection of featured items. Categories allows you to narrow your search to a general category, such as Movie/TV Themes for Ringers or College Logos for Screen Savers. (There may be several pages of available contentin a list. SelectNext9to view additional items.) Search allows you to use your keypad to enter search criteria to locate an item.
2. Select an option to continue: Once the item has been successfully downloaded and the Completed screen appears, select your desired option to assign the ringer or screen saver, run the application, listen to music, play the game, etc. Press mode. to quit the browser and return to standby Using My Content Manager Whether you purchase your Premium Services content from your Sprint PCS Phone or from your online account management page at www.sprint.
To access My Content Manager: 1. From the Sprint PCS Vision home page, select Downloads ( ABC ). Sprint PCS Vision 2. Select My Content Manager. (A list of your purchased items will display.) To download purchased content from My Content Manager: 1. From the My Content Manager display (see above), highlight the item you wish to download and press . (The information page for the selected item will display.) 2. Scroll to highlight Downloads and press . (The item will download automatically.
Selecting Call Tones Call Tones allow you to select ringback tones heard by the calling party. To select call tones: 1. Press to access the main menu. 2. Select My Content. 3. Select Call Tones and press . (The browser will launch and take you to the corresponding URL.) For complete information and instructions on downloading Games, Themes, Ringers, Screen Savers, Applications, or IM & Email see the Sprint PCS Vision User’s Guide at www.sprint.com.
Web Exploring the Web Sprint PCS Vision With Web access on your Sprint Power Vision Phone, you can browse full-color graphic versions of your favorite Web sites, making it easier than ever to stay informed while on the go. Follow sports scores and breaking news and weather and shop on your Sprint Power Vision Phone anywhere on the Nationwide Sprint PCS Network.
Opening the Browser Menu The browser menu may be opened anytime you have an active Sprint PCS Vision session, from any page you are viewing. To open the browser menu: Press the right softkey. (The browser menu will display.) Options available under the browser menu include: 286 Home ( ). Returns the browser to the Sprint PCS Vision home page. Forward ( ). Returns you to a previously viewed page (after having used the key). Mark this page ( ).
Refresh this page ( More... ( WXYZ ). Reloads the current Web page. ). Displays additional options: Show URL. Displays the URL (Web site address) of the site you’re currently viewing. Restart Browser. Refreshes the current browser session. Script Log. Allows you to display the script log. About Browser. Allows you to display your browser’s information. Preferences. Allows you to configure and manage your browser settings.
Accessing a Bookmark To access a bookmark: 1. Press the right softkey to open the browser menu. 2. Select View Bookmarks ( GHI ). 3. Scroll to highlight the bookmark you’d like to access and press OK (left softkey) to go to the Web site (or press the number corresponding to the bookmark you wish to access). Deleting a Bookmark To delete a bookmark: 1. Press the right softkey to open the browser menu. 2. Select View Bookmarks ( GHI ). 3.
Going to a Specific Web site To go to a particular Web site by entering a URL (Web site address): 2. Select Go to URL... ( PQRS Sprint PCS Vision 1. Press the right softkey to open the browser menu. ). 3. Select Address and press OK (left softkey). 4. Use your keypad to enter the URL of the Web site you wish to go to and press . 5. Press OK (left softkey) again to go to the Web site. Note: Not all Web sites are viewable on your phone. Reloading a Web Page To reload (refresh) a Web page: 1.
Restarting the Web Browser If the Web browser appears to be malfunctioning or stops responding, you can usually fix the problem by simply restarting the browser. To restart the Web browser: 1. Press the right softkey to open the browser menu. 2. Select More... ( ). 3. Select Restart Browser and press OK (left softkey). Adjusting the Browser Sound Volume To adjust the browser sound volume: 1. Press the right softkey to open the browser menu. 2. Select More... ( ). 3.
Sprint PCS Vision FAQs How will I know when my phone is ready for Sprint PCS Vision service? Sprint PCS Vision Your User name (for example, bsmith001@sprint.com) will display in the Phone#/UserID menu. Go to Settings > Phone Info > Phone#/User ID. How do I sign-in for the first time? You are automatically signed in to access Sprint PCS Vision services when you turn on your phone.
When is my data connection active? Your connection is active when data is being transferred. Outgoing calls are allowed; incoming calls go directly to voicemail. When Sprint PCS Vision service is active, the (Sending) or (Receiving) indicator flashes; when Sprint Power Vision service is active, the (Sending) or (Receiving) indicator animates on your phone’s display screen. When is my data connection dormant? If no data is received for 10 seconds, the connection goes dormant.
Section 3C SM Sprint Power Vision In This Section Sprint Power Vision Getting to Know Sprint Power Vision Exploring the Sprint Music Store SM Personalizing Your Service With On Demand Using Your Sprint PCS Phone as a Modem SM With Sprint Power Vision enjoy the next generation wireless data experience.
Getting to Know Sprint Power Vision Sprint Power Vision combines unmatched visual and sound clarity with Broadband-like speeds on your wireless phone. Utilizing the fastest commercially available wireless network technology (1xEV-DO) and leveraging continued investment in handset and application development, Sprint Power Vision offers the ultimate in wireless entertainment, real imaging solutions, instant communication, and a personalized information experience at Broadband-like speeds.
SM Exploring the Sprint Music Store Your Sprint Power Vision service allows you to access the Sprint Music Store, an online music distribution site that lets you purchase and download digital music files to play on your Sprint Power Vision Multimedia Phone. Accessing the Sprint Music Store To access the Sprint Music Store: 1. Press to access the main menu. 2. Select Music. 3. Follow the onscreen instructions to establish your User ID and password.
Purchasing and Downloading Music Now that you’re in the store, you can shop for songs to purchase and download to your phone. To find and download music files from the Sprint Music Store: 1. From the Sprint Music Store opening page, select an option to browse the store: Featured offers a revolving selection of highlighted songs and artists. Categories allows you to choose from categories such as What’s Hot, New Releases, and specific musical genres.
Backing Up Your Downloaded Music Files To back up your downloaded music files: 1. Go to http://musicstore.sprint.com and download the Sprint Music Store Backup Application software to your PC following the online instructions. 2. Connect your MM-7500 to your PC using the USB cable that came with your phone. 3. Use your PC to navigate to your phone’s music folder. 4. Select and copy the music files to a folder on your PC’s hard drive.
Playing Music From the Sprint Music Store The Sprint Music Store not only gives you access to great music, it also gives you a place to listen to and organize your music library. Accessing the Music Player 1. From the Sprint Music Store opening page, use your navigation key to select the Player tab. 2. From the Player display, select an option: All My Music to browse through all of your downloaded music. to select a customized playlist you’ve created to organize your music.
Personalizing Your Service With On Demand On Demand acts like a PC browser’s customized home page, displaying a variety of top categories such as News, Sports, Weather, Money, Movies, and more, tailored to your preferred area. These categories and the associated information are updated continuously throughout the day, so you’ll always be up-to-date and in-the-know.
Accessing On Demand Information Finding the information you’re looking for with On Demand is as easy as navigating a Web browser on your PC. (The following examples will illustrate how to access News and Movies information.) To access News information using On Demand: 1. Press to access the main menu. 2. Select On Demand. (The On Demand menu screen will display.) 3. From the On Demand menu screen, highlight a category (in this case, News) and press . 4.
To access Movies information using On Demand: 1. From the On Demand menu screen, highlight Movies and press . (A list of current movie titles will display.) 2. Select a movie title and press . 3. From the Movie Title display, select an option and follow Date to select a date for the movie. Details to view the movie’s details, which may include cast, running time, plot synopsis, MPAA rating, reviews, etc.
Using Your Sprint PCS Phone as a Modem Your Sprint Power Vision Multimedia Phone's data capabilities enable you to use your phone's high-speed data connection as a modem for your desktop or laptop PC. You'll be able to send and receive email, browse the Internet, and access your company's network anywhere on the Nationwide Sprint PCS Network. Note: To use this service, you are required to sign up on a Sprint Power Vision with Phone as Modem plan. Go to www.sprint.
4. Launch the Sprint Power Vision Connection Manager software, select a profile, and click Connect. 5. Once the connection is established, launch an Internet session, check your email, or do anything else you would do using a traditional data connection. 6. When you’re ready to terminate the data connection, 7. Disconnect the USB cable from your phone and your PC.
304
Section 3D SM Sprint PCS Voice Command In This Section Getting Started with Sprint PCS Voice Command SM Creating Your Own Address Book Voice Command Making a Call with Sprint PCS Voice Command Accessing Information Using Sprint PCS Voice Command With Sprint PCS, reaching your friends, family, and coworkers has never been easier – especially when you’re on the go. You can even listen to Web-based information, such as news, weather, and sports.
Getting Started With Sprint PCS Voice Command With Sprint PCS Voice Command: You can store all your contacts’phone numbers, so you can simply say the name of the person you want to call. There’s no need to punch in a lot of numbers, memorize voicemail passwords, or try to dial while you’re driving. You can call anyone in your address book – even if you don’t remember their phone number. You don’t need to worry about losing your contacts or address book.
Creating Your Own Address Book You can program up to 500 names into your personal address book, with each name having up to five phone numbers. That’s 2,500 phone numbers, and with the advanced technology of Sprint PCS Voice Command, you can have instant access to all of them. There are four ways to update your address book: On the Web. Go to www.talk.sprintpcs.
Making a CallWith Sprint PCS Voice Command To make a call with Sprint PCS Voice Command: 1. Press Shift and you’ll hear the “Ready”prompt. 2. After the “Ready”prompt, simply say, in a natural voice, “Call”and the name of the person or the number you’d like to call. (For example, you can say, “Call Jane Smith at work,”“Call John Baker on the mobile phone,”“Call 5551234,”or “Call Bob Miller.”) 3. Your request will be repeated and you will be asked to verify. Say “Yes”to call the number or person.
Accessing Information Using Sprint PCS Voice Command To access information using Sprint PCS Voice Command: 1. Press Shift . 2. Say “Call the Web”and choose from a listing of information categories like news, weather, and sports. – or – Simply say “Call news room,”“Call the weather,”“Call Sports Central,”etc. Voice Command Note: Sprint PCS Voice Command is not available while roaming off the Nationwide Sprint PCS Network.
310
Section 4 Safety and Warranty Information
312
Section 4A Safety In This Section Getting the Most Out of Your Reception Maintaining Safe Use of and Access to Your Phone Caring for the Battery Acknowledging Special Precautions and the FCC Notice Owner’s Record Phone Guide Proprietary Notice Safety Part of getting the most out of your Sprint PCS Phone is learning how the phone works and how to care for it.This section outlines performance and safety guidelines that help you understand the basic features of your phone’s operation.
Getting the Most Out of Your Reception Keeping Tabs on Signal Strength The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal. If you’re inside a building, being near a window may give you better reception.
Maintaining Your Phone’s Peak Performance There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service. Hold the phone with the antenna raised, fully-extended, and over your shoulder. Try not to hold, bend, or twist the phone’s antenna. Don’t use the phone if the antenna is damaged. Speak directly into the mouthpiece. Avoid exposing your phone and accessories to rain or liquid spills.
Maintaining Safe Use of and Access to Your Phone FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE Using Your Phone While Driving Talking on your phone while driving (or operating the phone without a hands-free device) is prohibited in some jurisdictions. Laws vary as to specific restrictions. Remember that safety always comes first.
Turning Off Your Phone Before Flying Turn off your phone before boarding any aircraft. To prevent possible interference with aircraft systems, the U.S. Federal Aviation Administration (FAA) regulations require you to have permission from a crew member to use your phone while the plane is on the ground. To prevent any risk of interference, FCC regulations prohibit using your phone while the plane is in the air.
Caring for the Battery Protecting Your Battery The guidelines listed below help you get the most out of your battery’s performance. Use only Sprint-approved batteries and desktop chargers. These chargers are designed to maximize battery life. Using other batteries or chargers voids your warranty and may cause damage. In order to avoid damage, charge the battery only in temperatures that range from 32° F to 113° F (0° C to 45° C).
Acknowledging Special Precautions and the FCC Notice FCC Notice This phone may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the phone if such interference cannot be eliminated. This device has been tested and found to comply with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
Specific Absorption Rates (SAR) for Wireless Phones The SAR is a value that corresponds to the relative amount of RF energy absorbed in the head of a user of a wireless handset. The SAR value of a phone is the result of an extensive testing, measuring and calculation process. It does not represent how much RF the phone emits. All phone models are tested at their highest value in strict laboratory settings.
Owner’s Record The model number, regulatory number and serial number are located on a nameplate inside the battery compartment. Record the serial number in the space provided below. This will be helpful if you need to contact us about your phone in the future. SM Model: Sprint Power Vision Multimedia Phone MM-7500 by Sanyo Serial No.
322
Section 4B Manufacturer’s Warranty In This Section Manufacturer’s Warranty Your Sprint PCS Phone has been designed to provide you with reliable, worry-free service. If for any reason you have a problem with your equipment, please refer to the manufacturer’s warranty in this section. For information regarding the terms and conditions of service for your Sprint PCS Phone, please visit www.sprint.com and click on the “Terms & Conditions”link at the bottom or call Sprint Customer Service at 1-888-211-4PCS .
Manufacturer’s Warranty Customer Limited Warranty SPRINT SPECTRUM, L.P., (Sprint) offers you a limited warranty that the enclosed subscriber unit (Product), including accessories in the product package, will be free from defects in material or workmanship as follows: SUBSCRIBER UNIT: A.
material and workmanship); (ix) damage the result of fire, flood, acts of God or other acts which are not the fault of Sprint and which the Product is not specified to tolerate, including damage caused by mishandling and blown fuses; (x) consumables (such as fuses); or (xi) any Products which have been opened, repaired, modified or altered by anyone other than Sprint or a Sprint authorized service center.
This limited warranty gives you specific legal rights, and you may have other rights which vary from State to State. For other Warranty Service Information, please call SPRINT CUSTOMER SERVICE at 1- 888- 211- 4727.
Warranty Copyright(c) 2005 ACCESS Systems America Inc. ACCESS, NetFront are registered trademarks or trademarks owned by ACCESS Co., Ltd. in Japan and selected countries worldwide. NetFront is a registered trademark of NetFront Communications, Inc.in the United States and is used under a license. Portions of this software are based in part on the work of the Independent JPEG Group. Copyright (c) 2005 InnoPath Software. All rights reserved. © 2005 Sprint Nextel. All rights reserved.
328
Index A Abbreviated Dialing 42, 84 Airplane Mode 74 Alarm Clock 149 Alert Notification 57 Animation 61 Answering Calls 28 Any Key Answer 82 AOL Instant Messenger 278 AOL Mail 277 Area Name Display 62 Auto Answer Mode 80 Automatic Speech Recognition (ASR) 158-169 Activating 158 ASR Help 169 DigitTraining 168 Making a Voice Call 160 Making International Calls 165 Making Sprint PCS Ready Link Calls 166 Index C Calculator 152 Calendar 138-146 Call Alarms 141 Call Forwarding 265 Call Guard 105 Call History 115
Contacts Directory 123-136 Adding an Entry 125 Assigning Images 133 Dialing From 40 Displaying 124 Editing Entries 131 Entry Options 129 Finding Entries 126 Secret Entries 135 Countdown Timer 150 D Display Language 80 Display Settings 59-66 Area Name 62 Background 65 Font Size 65 Incoming Calls 61 Menu Style 79 My Buddy 64 Screen Saver 64 Standby Display 63 Downloading Premium Services Content 280-284 E EarthLink 277 Email 277 330 Entering Text 43-48 Alphabet Mode 47 Input Mode 43 T9 Text Input 44 Erasing
M Making Calls 26 Menu Diagram 110 Menu Navigation 108 Menu Style 79 Messaging Pop-up Messages 68 Settings 68 Mini-Flashlight 187 MSN Hotmail 277 MSN Messenger 278 Multimedia - See SprintTV My Buddy 64 My Content Manager 282 My Favorites 77 N Net Guard 271 Normal/Macro Switch 184 O On Demand 299-301 Open/Close Flip Option 81 R Ready Link - See Sprint PCS Ready Link Ready Link Guard 230 Resetting Your Phone 97 Through SMS 98 Restricting Calls 93 Return to Standby 66 Index Index P Phone as Modem 302-303 P
Ringer Types 50 Calendar/Alarm 52 Messaging 52 Roaming Calls 51 Sprint PCS Ready Link Calls 51, 230 Voice Calls 50 Voicemail 52 Roaming 101-106 Call Guard 105 Setting Roam Mode 104 S Safety Information 313-321 Screen Call 173 Screen Saver 64 Security 89-100 Calling in Lock Mode 92 Changing the Lock Code 92 Locking Your Phone 90 Menu 90 Unlocking Your Phone 91 Self-Timer 185 Side Key Guard 82 Silence All 58 Sleep Mode 66 SMS Messaging - See Text SMS Messaging and Voice SMS Messaging Special Numbers 94 Speed
Index Sprint Power Vision 293-303 Data Connection 302 Enabling 294 On Demand 299 Phone as Modem 302 Sprint Music Store 295 SprintTV 235-241 Channel Listings 237 Channel Options 236 FAQs 239 Playing a Clip 238 Standby Mode Display 63 Start-up/Power-off Tone 53 Stitch Shots 186 Stop Watch 151 T T9 Text Input 44 Text Greeting 59 Text SMS Messaging 256-259 Accessing 258 Composing 257 Three-Way Calling 264 To Do List 144 Tone Length 53 TTY Use 75 U Unlocking Your Phone 91 Updating Your Phone 153 User Address 14
V Vibrate Types 56 Videos Downloading 206 Options 193 Recording 191 Sending 200 Storing 197 Uploading 206 Voice Memos 170 Voice Prompt 54 Voice SMS Messaging 260-262 Accessing 262 Composing 261 Voice Tags Erasing 164 Making a Call With 162 Programming 163 Reviewing 163 Voicemail Clearing the Icon 253 Menu Key 254 Message Alerts 247 Notification 247 Options 250 Password 6 Retrieving 248 Setting Up 5, 246 Volume Settings 55 334 W Warranty 324 Web 285 World Clock 152 Y Yahoo! Mail 277 Yahoo! Messenger 278 I
Notes ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ______________________________________
