User manual

Ready to Connect
The Ready state is the default state when the PCS Connection Card is
connected. It signifies that the PCS Connection Manager Software is ready
to connect to the network. The
GObutton is now enabled and the signal
strength icon is visible.
Click
GOto initiate a connection.
If a Dial-up Networking Connection is also available, the
GOsubmenu
displays. The
GOsubmenu lists all available connections grouped by
connection type and in alphabetical order. The connection type
(PCS Vision or Dial-up Networking) appears on the left with the
connection name to its right. Duplicate connections appear only once.
Connecting
In this state the PCS Connection Manager is attempting to make a
connection. The signal strength icon is visible, however the
GO button
changes to
Stop.
If you attempt to establish a PCS Vision connection that requires a
password or a Dial-up Networking Connection requiring a remote login
and password, a dialog box will appear. Enter the relevant information
and click
OKto continue the connection process.
To cancel the connection, click
Stop.
Section 3: Using the PCS Connection Card
40 3A: The PCS Connection Manager