Assembly Manual AC72907 AC72907 Assembly Manual Accent Chair CAUTION THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assembly Manual AC72907 AX1 BX1 Metal Back Bracket DX1 CX1 Wood Back Panel EX1 Left Leg FX1 IX3 Bolt ( 1/4'' x 15mm) Back Pad kX4 JX4 Seat Cushion Bottom Metal Frame H X 15 GX1 Right Leg Bolt ( 1/4'' x 40mm) Bolt ( 1/4'' x 35mm) LX1 Felt Pad ( 19mm) Allen Wrench (M4) Extra Hardware Touch-up Pen Please read through the instructions below to familiarize yourself with the parts and steps before assembly. Make sure all parts and hardware are present before assembly.
Assembly Manual AC72907 ASSEMBLY INSTRUCTIONS Note: Assemble on a soft and smooth surface to prevent damage to product finish. Do not overtighten bolts to avoid stripping. 1 Connect Leg (C), Leg (D) and Bottom Metal Frame (E) together. Using Bolts (H) and Allen Wrench (L). Note: Do not fully tighten bolts. C D E H L 2 Attach Metal Back Bracket (A) to assembled metal base in Step 1, using Bolt (H) and Allen Wrench (L). Note: Do not fully tighten bolts.
Assembly Manual AC72907 3 Attach Seat Cushion (F) to assembled metal frame in Step 2, using Bolts (J) and Allen Wrench (L). Fully tighten. Note: Please pay attention to the direction of the seat cushion. The front label is on the bottom of the seat cushion. FRONT F L J F F 4 Attach Wood Back Panel (B), using Bolts (l), Bolts (H), and Allen Wrench (L). Do not fully tighten. Note: Please pay attention to the direction of the Wood Back Panel (B). Do not fully tighten bolts.
Assembly Manual AC72907 5 Put assembled chair on a flat surface. Push legs up or down as necessary to level. Once level, tighten all bolts. Note: Each leg has an adjustable foot leveler to help level your chair. Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or shipping. Foot Leveler 6 Complimentary Felt Pads (K) are included to help protect your floor or make the chair slide easier.
Assembly Manual AC72907 7 Complimentary Back Pad (G) is included. If you prefer an upholsteredback, please attach the Back Pad (G) to the Wood Back Panel (B). B 8 G Assembly complete. Enjoy.
