Assembly Manual KF-Y2001 Assembly Manual for KF-Y2001 Counter & Bar Height Swivel Stool CAUTION THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assembly Manual KF-Y2001 Ax1 Bx1 Cx1 Dx1 Ex1 Fx5 M6 x 30mm Ix9 Hx4 Gx4 M6 x 20mm Jx9 M6 x 25mm M6 Kx1 4# M6 Please read through the instructions below to familiarize yourself with the parts and steps before assembly. Note: Do NOT use power tools for assembly.
Assembly Manual KF-Y2001 A EMB Y I 1 UC I Unpack and place seat (A), legs (B&C), foot rest (D) and swivel plate (E) on a clean surface. Attach leg (B) to leg (C), using longest bolt (F), lock washer (I), flat washer (J) and allen wrench (K). ote Do not fully tighten yet. K F J I B B C C 2 Loosely attach the bolts (H) one by one and keep them loose. Do not fully tighten. After loosely attach the first bolt, move on to the diagonal bolt.
Assembly Manual KF-Y2001 3 Fully tighten the longest bolt (F) in step 1 with allen wrench (K). Then attach swivel plate (E) to assembled legs in step 2, using longest bolts (F), lock washers (I), flat washers (J) and allen wrench (K). Do not fully tighten yet. K I 4 E K F J Put assembled legs in step 3 on a flat surface. Push legs up or down as necessary to level. Once level, tighten all bolts.
Assembly Manual KF-Y2001 5 Turn assembled legs in step 3 upside down, and attach them to seat (A), using shortest bolts (G), lock washers(I), flat washers(J) and allen wrench(K). ote Tighten all bolts. K G I J B C A 6 Turn assembled chair upright and place on a flat surface. ote ach leg has an ad ustable foot leveler to help level your chair.
Assembly Manual KF-Y2001 7 Assembly complete. Enjoy. CAUTION: PINCH POINT. Please keep hands clear during swivel.
