Use and Care Manual

Page 4 of 6
Fully tighten the longest bolt (F) in step 1 with allen wrench (K). Then
attach swivel plate (E) to assembled legs in step 2, using longest bolts
(F), lock washers (I), flat washers (J) and allen wrench (K). Do not fully
tighten yet.
Put assembled legs in step 3 on a flat surface. Push legs up or down as
necessary to level. Once level, tighten all bolts.
Assembly Manual
KF-Y2006
4
3
I
K
E
B
C
K