Assembly Manual BS72051 BS72051 Assembly Manual Counter & Bar Height Swivel Stool A CAUTION THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assembly Manual BS72051 Ax2 Bx2 Cx1 Dx1 Ex1 oN EE SS Long Bolt Méx35mm H2x12 H3x12 H4x12 Short Bolt ji Méx20mm Spring Washer Flat Washer Héx4 Tx Cross Metal Plate Foot Leveler Please read through the instructions below to familiarize yourself with the parts and steps before assembly.
Assembly Manual BS72051 ASSEMBLY INSTRUCTIONS oO Connect Leg (A) and Leg {B) together to form the stool base. Place the cross metal plate {H5) in the middle of the stool base. Proceed to loosely attach the Short Bolts (H2) one by one, but keep them loose. Do not fully tighten them yet. After loosely attaching the first bolt, continue with the remaining bolts. Once all 4 bolts are attached, use the Allen Wrench (T1) to tighten them.
Assembly Manual BS72051 © Flip over the stool base. Loosely attach the Long Bolts (H1) one by one and keep them loose. Do not fully tighten. After loosely attach the first bolt, move on to the diagonal bolt. After all 4 bolts are attached, use Allen Wrench (T1) to tighten. Note: Do NOT use power tools for assembly. Attach Swivel Plate {E} to assembled stool base in Step 3, using Short Bolt (H2} Lock Washers (H3), Flat Washers (H4) and Allen Wrench (T1}. Note: Do not fully tighten yet.
Assembly Manual BS72051 9 Put assembled stool base in Step 4 on a flat surface. Push legs up or down as necessary to level. Once level, fully tighten all bolts. Attach the assembled stool base in Step 5 to the Seat Bucket (C), using Short Bolts (H2), Lock Washers (H3), Flat Washers {H4) and Allen Wrench (T1). Fully tighten all bolts.
Assembly Manual BS72051 €) Attach the Foot levelers (Hé) fo the Leg(A) and Leg (B). 0 Assembly complete. Enjoy. Note: Each leg has an adjustable foot leveler to help level your chair. CAUTION:PINCH POINT. Foot levelers Please keep hands clear during swivel.
