Use and Care Manual
4
3
Assembly Manual
T1
Page 4 of 7
F
B
H5
H7
H6
45°
Rotate the Swivel Plate (F) by 45 degrees.
Turn over the storage base, attach the
Swivel Plate (F) to Storage Body (B),
using Bolts (H5), Spring Washers (H7),and Flat Washers (H6).
Note: Loosely attach the bolts one by one and keep them loose. Do not fully
tighten. After all 4 bolts are attached, use Allen Wrench (T1) to tighten.
Rotate the
Swivel
Plate by 45 degrees.
F







