Use and Care Manual
T2
H4
6
5
Assembly Manual
Page 5 of 7
B
B
A
H1
H3
H1
H2
Attach the Bolts (H1) to the Storage Body (B), and fully tighten all of them.
Attach the Backrest (A) to the Storage Body (B), using the Bolts (H1), the Flat
Washers (H3), the Spring Washers (H2), and the Nut (H4).
Note: Loosely attach the nuts one by one and keep them loose. Do not fully
tighten. After all the 3 nuts are attached, use Open End Wrench (T2) to tighten.







