Assembly Manual KJW.B004 BED Assembly Manual KJW.B004 CAUTION THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assembly Manual KJW.B004 A S SE M B LY I NS TR U CT I O NS Read these instructions carefully and keep for future reference. Refer to parts inventory for guidance, and ensure you have all pieces before starting. When assembling, place all parts on a soft, clean, and flat surface such as a carpet to prevent scratches. 30 MINUTES Structural integrity is only guaranteed if all TIME bolts are installed and properly tihgtened.
Assembly Manual KJW.B004 10. SIDE RAIL LEG ×2 11.BED LEG ×2 12.SLATS ×7 (2 Set) A.RATCHET TOOL ×1 B.M4 ALLEN KEY ×1 C.JCBB BOLT M8 X 70MM (BLACK) ×3 M4 M5 D.JCBC BOLT M6 X 45MM ×6 4mm E.JCBC BOLT M6 X 35MM ×6 G.JCBC BOLT M6 X 16MM H.M6 SPRING WASHER (BLACK) ×4 ×12 J.WOOD SCREW M4 X 30MM ×28 F.JCBC BOLT M6 X 25MM ×10 I.M6 FLAT WASHER ×12 Not Included Phillips Head Screwdriver Please read through the instructions below to familiarize yourself with the parts and steps before assembly.
Assembly Manual KJW.B004 ASSEMBLY INSTRUCTIONS 1 Open the black non-woven fabric before take out the headboard wing, side rail and hardware box. 1 2 Attach headboard wing (left) (2) and headboard wing (right) (3) to the headboard (1), using JCBC Bolt M6 X 35MM (E), M6 Spring Washer (H), M6 Flat Washer (I) and M4 Allen Key (B). Fully tighten.
Assembly Manual KJW.B004 3 Attach bed leg (11) to the footboard (4). 11 4 4 11 11 4 Attach side rail leg (10) to side rail (left) (5) and side rail (right) (6), using JCBC Bolt M6 X 25MM (F) and M4 Allen Key (B). Fully tighten. Note: Before assembled the side rail, please ensure that the side rail laminated veneer lumber LVL in parallel.
Assembly Manual KJW.B004 5 Attach assembled side rail (left) (5) and side rail (right) (6) to footboard (4), using M5 Ratchet Tool (A). Fully tighten. Note: Loosen the pre-attached bolt slightly, after attach the side rail, fully tighten the pre-attached bolt.
Assembly Manual KJW.B004 7 Attach metal center support (8) and metal center leg (9) to metal center rail (7), using JCBB Bolt M8 X 70MM (C) and M5 Ratchet Tool (A). Fully tighten. 7 M5 9 C A 8 8 7 9 8 Attach assembled metal center support (8) to side rail (left) (5) and side rail (right) (6), using JCBC BOLT M6 X 16MM (BLACK) (G) and M4 Allen Key (B). Fully tighten.
Assembly Manual KJW.B004 9 Attach slats x7 (2 Set) (12) to side rail (left) (5) and side rail (right) (6), using Wood Screw M4 X 30MM (J) and Phillips Head Screwdriver (Not Included). Fully tighten. Note: Please fully tighten the eight side screws that shown in below circled, then fully tighten the others screws. 12 28x J 12 10 Attach slats x7 (2 Set) (12) to metal center rail (7), using JCBC Bolt M6 X 25MM (F) and M4 Allen Key (B). Fully tighten.
Assembly Manual KJW.B004 11 Assembly Completed. Enjoy.
Assembly Manual KJW.B004 Design Exquisite Furniture For Your Home PRODUCT WARRANTY · 1-year limited on cover against splitting, peeling, and/or tearing. · 1-year limited on internal and external frame structure. Contact us: We make all efforts to guarantee that the products you receive are in excellent condition. If there are any parts missing or damaged, the Customer Service Team will be happy to provide free replacements for you.
