Use and Care Manual
10
Assembly Manual
KJW.B004
9
Remarks: Metal center leg
can adjust the heighest.
F
7
12
B
J
12
12
Attach slats x7 (2 Set) (12) to side rail (left) (5) and side rail (right) (6), using
Wood Screw M4 X 30MM (J) and Phillips Head Screwdriver (Not Included).
Fully tighten.
Note: Please fully tighten the eight side screws that shown in below circled,
then fully tighten the others screws.
Attach slats x7 (2 Set) (12) to metal center rail (7), using
JCBC Bolt M6 X 25MM (F) and M4 Allen Key (B). Fully tighten.
ATTENTION: Please keep the adjuster around 5 to 8mm distant away
from the floor.
Page 8 of 10
28x










