TC-SPC-SCE-20-E-2017 SPECIFICATION FOR APPROVAL PRODUCT: SPSCAP SERIES: SCE MODEL: SCE0360C0-0002R7SHA Rev: 1.0 Prepared Checked Approved Supreme Power Solutions Co., Ltd. Room 425,Tailai Business Mansion,No.88,Nongda South Rd, Haidian District,Beijing, P.R. China TEL: +86-400-600-7891 FAX: +86-10-61272268 Email: info@spscap.
TC-SPC-SCE-20-E-2017 Contents 1. Scope .................................................................................................................................................... 3 2. Construction and Dimensions ............................................................................................................... 3 1) Construction ................................................................................................................................... 3 2) Dimensions ......
TC-SPC-SCE-20-E-2017 1. Scope These are the specifications of SPSCAP (Electric Double Layer Capacitor) which you are using, please review this document and approve it. 2. Construction and Dimensions 1) Construction Inside structure: wound anode and cathode electrode with separator Outer structure: aluminum case, insulating sleeve Dimensions Max torque 4N·m 2×M5 deep7 Φ35.3Max L1±0.3 3±0.15 Φ35.5Max Φ 8±0.1 12.7±0.1 2) L2±0.3 Vent Dimension(mm) Part Number SCE0360C0-0002R7SHA L1 L2 62.2 67 3.
TC-SPC-SCE-20-E-2017 4. General Characteristics Specifications Items Specification Rated Voltage (V DC) 2.7 Surge Voltage (V DC) 2.85 Operating Temp. (℃) -40 ～ +65 Rated Capacitance (F) 360 Capacitance Tolerance -10% ～ +20% ESR Max. (AC@1KHz,mΩ) 2.8 ESR Max. (DC, mΩ) 3.1 Maximum Continuous Current (ΔT=15℃, A) 21 Maximum Continuous Current (ΔT=40℃, A) 34 Maximum Peak Current (A) (1s) 230 Max.LC (Room Temp. after 72hrs, mA) 0.5 Typical Thermal Resistance (Rth Housing,℃/W) 10.
TC-SPC-SCE-20-E-2017 5. Reliability Specifications Item Specification Capacitance Step. 2 Temp. Characteristics Less than 150% of spec Value Step 1: +25±2℃,1h Capacitance Change within 5% of Initial Value Step 2: +65±2℃,1h Step. 3 ESR Less than 150% of spec Value Step 3: -25±2℃,1h Change within 5% of Initial Value Step 4: -40±2℃,1h Capacitance ESR Thermal Cycle Humidity Test DC Life Shelf Life Cycle Life Change within 5% of Initial Value ESR Step.
TC-SPC-SCE-20-E-2017 6. Measuring Method 1) Charge and Discharge procedure (figure 6-1) A) Charge the capacitor using constant current I to rated voltage V0 B) Keep rated voltage 5 min C) Discharge the capacitor using constant current I to half rated voltage, record discharge time T1 during voltage change from V1 to V2 D) Rest 2-5s, record voltage change ΔV E) Discharge it to a very low voltage around 0.
TC-SPC-SCE-20-E-2017 8. Cautions for Use Please notice below points when you start use SPSCAP. 1) The SPSCAP gets polarity through aging/testing process before it is packed, so please mount it in accordance with its polarity to maintain the best condition; 2) Please only apply SPSCAP at rated voltage.
